B. Idle (Ref. Fig. 012) When both engines operate at idle, the green IDLE message is displayed, upon reception of a boolean (ECU X label 272 bit 29), in the upper part of the engine parameter area at the same place as the A FLOOR message. The IDLE message pulses for 10 seconds then remains steady. It is displayed only if the following conditions are met:
 -A.FLOOR priority message not displayed
 -A/THR programming activated (transmitted by the FMGC A)
 -both engines operate at idle
 -aircraft in flight

R **ON A/C 106-149, 303-399, 401-499,
 B. Idle (Ref. Fig. 011) When both engines operate at idle, the green IDLE message is displayed, upon reception of a boolean (ECU X label 272 bit 29), in the upper part of the engine parameter. The IDLE message pulses for 10 seconds then remains steady. It is displayed only if the following conditions are met:
 -A.FLOOR priority message not displayed
 -A/THR programming activated (transmitted by the FMGC A)
 -both engines operate at idle
 -aircraft in flight
 **ON A/C ALL
 12. Slats and Flaps Indication
__________________________ The Slats position and the Flaps position are displayed in the medium right part of the display as shown in the following figure.
R **ON A/C 401-499,
 (Ref. Fig. 017)
R **ON A/C 001-049, 051-099, 101-105, 201-299, 301-302,
R (Ref. Fig. 018)
 1EFF : ALL 1 31-66-00Page 34 1 1 Aug 01/05 1 1 1CES 1

R  Flaps and slats position indication 
R  Figure 017 
R 1EFF :  401-499,  1  31-66-00 Page 35 
1  1  Aug 01/05
 1  1
 1CES  1

 Flaps and slats position indication R Figure 018
R 1EFF : 001-049, 051-099, 101-105, 201-299, 1 31-66-00Page 36 1301-302, 1Aug 01/05 1 1 1CES 1

R  **ON A/C 106-149, 303-399, 
R  (Ref. Fig. 018A) 
R  **ON A/C 151-199, 
R  (Ref. Fig. 018B)
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
 A. Operation In clean configuration, a grey wing shaped symbol is presented. When a position different from the clean configuration is selected, a scale appears composed of white dots and of a FLAP indication. This scale features the different possible positions of the slats and the flaps. The actual position is indicated by green indexes moving in either direction according to the movement of the surfaces : extension or retraction. The selected position is indicated by cyan indexes pointing to the next target position of the slats and flaps. At the same time the FLAP indication becomes cyan and a cyan number gives the selected position in accordance with the reference numbers which are written on the flaps/slats control panel. When the target position is reached, the cyan indexes disappear and the FLAP message comes back to the white color whereas the number becomes green. This number changes to the FULL message when the slats and flaps are fully extended. 

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-66-00Page 37 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1

 Flaps and slats position indication R Figure 018A
R 1EFF : 106-149, 303-399, 1 31-66-00Page 38 1 1 Aug 01/05 1 1 1CES 1

 Flaps and slats position indication 
R  Figure 018B 
R 1EFF :  151-199,  1  31-66-00 Page 39 
1  1  Aug 01/05
 1  1
 1CES  1

R  **ON A/C 106-149, 303-399, 401-499,
 A. Operation In clean configuration, a grey wing shaped symbol is presented. When a position different from the clean configuration is selected, a scale appears composed of white dots. This scale features the different possible positions of the slats and the flaps. The actual position is indicated by green indexes moving in either direction according to the movement of the surfaces : extension or retraction. The selected position is indicated by cyan indexes pointing to the next target position of the slats and flaps. At the same time a cyan number gives the selected position in accordance with the reference numbers which are written on the flaps/slats control panel. When the target position is reached, the cyan indexes disappear and the number becomes green. This number changes to the FULL message when the slats and flaps are fully extended.
 **ON A/C 001-049, 051-099, 101-149, 201-299,
 The following table gives the correspondence between the S/F lever positions and the position in degrees of the surfaces.
 -----------------------------------------------------------------------------
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統(tǒng) 8(79)