R 1EFF : ALL 1 31-67-00Page 58 1 1 Aug 01/05 1 1 1CES 1
Permanent Parameters - Display of G LOAD, ALT SEL, GMT R Figure 035
R 1EFF : 106-149, 303-399, 401-499, 1 31-67-00Page 59 1 1 Aug 01/05 1 1 1CES 1
**ON A/C ALL
R (5) G LOAD indication Item (3):
R **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 031)
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
R R (Ref. Fig. 032)
R **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 035)
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
R (Ref. Fig. 036)
**ON A/C ALL
G LOAD is displayed in amber for flight phases 4 to 10, when G Load is less than 0.7 G or more than 1.4 G for more than 2 s. Information remains displayed 5 s after excessive G Load condition has disappeared.
G LOAD is not displayed in the other cases or when no valid data are available from the ADIRUs. G Load digital value is amber, with 0.1 G resolution. The sign is displayed for negative values only. The display can vary from -9.9G to 0.7G, and from 1.4G to 9.9G.
R 1EFF : ALL 1 31-67-00Page 60 1 1 Aug 01/05 1 1 1CES 1
Permanent Parameters - Display of G LOAD, ALT SEL and the time
R Figure 036
R 1EFF : 1201-299, 301-302, 1 1CES 001-049, 051-099, 101-105, 151-199, 1 111 31-67 -00 Page 61 Aug 01/05
R (6) Gross Weight (GW) indication Item (5):
R **ON A/C 106-149, 303-399, 401-499,
(Ref. Fig. 031)
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
R (Ref. Fig. 032)
**ON A/C ALL
Gross Weight unit is in KG. Gross Weight digital value, given by the FMGC, with 100 KG resolution:
R **ON A/C 106-149, 303-399, 401-499,
R - normally green (case 1) (Ref. Fig. 037) - it is remplaced by cyan dashes when the gross weight value is coded as No Computed Data. (case 2) - replaced by amber XX when data are not available in all other cases. (case 3)
R 1EFF : ALL 1 31-67-00Page 62 1 1 Aug 01/05 1 1 1CES 1
Permanent Parameters - Display of the Gross Weight R Figure 037
R 1EFF : 106-149, 303-399, 401-499, 1 31-67-00Page 63 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
-normally green
(case 1) R (Ref. Fig. 038)
-
it displayed in amber when the information is valid and the value is out of limit, before the phase 4 is reached. (case 2)
-
it is not displayed when the gross weight value is coded as No Computed Data. (case 3)
-replaced by amber XX when data are not available in all other cases. (case 4)
**ON A/C ALL
The display can vary from 0 to 99,900 KG in 100 KG steps.
R **ON A/C 106-149, 303-399, 401-499,
(7) Feedback monitoring messages A safety device is implemented in the DMC and DU, in order to monitor the critical parameters displayed on the SD. For example the UTC parameter displayed on the permanent data area is a critical parameter and must be monitored. Likewise the SD monitors the parameters of two other DUs (in normal configuration: thePFD and ND of the F/O side). When a discrepancy occurs between an incoming parameter (at the DMC input) and the same parameter ready to be drawn on the relevant DU (inside the DU), then a feedback message is generated on the DUs which monitor the faulty DU.
1EFF : ALL 1 31-67-00Page 64 1 1 Aug 01/05 1 1 1CES 1
Permanent Parameters - Display of the Gross Weight R Figure 038
1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-67-00Page 65 1201-299, 301-302, 1Aug 01/05 1 1 1CES 1
These messages are displayed in amber on the SD in the permanent data
area, on two lines:
On the upper zone:
CHECK F/O PFD . . . (case 5: the SD image is displayed on the SD or
the capt ND)
CHECK CAPT PFD. . . (case 6: the SD image is displayed on the EWD or
the f/off ND)
On the lower zone:
CHECK F/O ND. . . . (case 3: the SD image is displayed on the SD)
CHECK CAPT ND . . . (case 4: the SD image is displayed on the EWD)
CHECK SD .. . . . . (case 5 the SD image is displayed on the f/off ND
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統(tǒng) 8(88)
