-
in the ROSE-VOR mode

 -
in the ROSE-NAV mode when the flight plan is not valid

 -
in the ARC mode when the flight plan is not valid

 It is displayed when transmitted by the FM in normal operation
 status.
 (Ref. Fig. 048)

R **ON A/C 001-049, 056-056, 058-058, 061-099, 101-149, 151-199, 201-299, R 301-399, 401-499,
 Post SB 31-1127 For A/C 001-049,056-056,058-058,061-061,101-103,201-203,
 (i) TIME marker or EQUITIME point This symbol predicts the location of the A/C along the active flight plan at the entered time, or it perdicts the equitime point location between two airport references. This symbol is green.
 1EFF : ALL 1 31-65-00Page A3 1 1 Aug 01/05 1 1 1CES 1

R  ND - Energy circle Figure 048
 1EFF : 1 1 1CES  ALL  1 111 31-65-00 Page A4 Feb 01/05

 **ON A/C ALL
 (5) Optional Navaids
 (a) General
R  (Ref. Fig. 021) In addition, each pilot may select additional information which are called option: waypoints or navaids or airports which are in the zone presented on the ND, but which are not included in the flight plan, or constraint for given points.
 Each option is selected by pressing the associated pushbutton switch on the FCU-EFIS control section. These options are exclusive, and the priority is given to the last one which has been selected.
 The five P/B switches dedicated to the options are:
 (b)
 ARPT For airports, presented with a star symbol (in magenta color).

 (c)
 NDB For NDB navigation stations (triangle symbol in magenta).

 (d)
 VOR-D For VOR-D navigation stations: symbol, cross for VOR, circle plus cross for VOR-DME, and circle for DME alone (in magenta color).

 (e)
 WPT For waypoints not included in the flight plan symbol lozenge (in magenta color).

 (f)
 CSTR When the pilot presses the CSTR pushbutton switch on the FCU, the ND displays in magenta color the altitude, speed, time , possible constraints at waypoints of the flight plan. The altitude constraints may be MCA (minimum crossing altitude) at given fixes, or constrained altitudes at fixes in terminal areas and along final trajectory, or minimum holding altitudes. All the above constraints are written just below the concerned waypoint identification (maximum of 3 lines of 6 characters each). For example: TOI -6000 180 Kt.

 21:30
 1EFF : ALL 1 31-65-00Page A5 1 1 Feb 01/05 1 1 1CES 1

R **ON A/C 001-049, 056-056, 058-058, 061-099, 101-149, 151-199, 201-299, R 301-399, 401-499, Post SB 31-1127 For A/C 001-049,056-056,058-058,061-061,101-103,201-203,
 (g) Track and distance In PLAN mode, the track and distance from the MAP reference point to the following FLIGHT PLAN waypoint are displayed below the MAP reference point identification. As soon as CSTR option is selected on the FCU, the track and distance information is replaced by the constraint data.
 **ON A/C ALL
 G. PLAN Mode

R **ON A/C 106-149, 303-399, 401-499,
 (Ref. Fig. 013)
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
 (Ref. Fig. 014)
 **ON A/C ALL
 The ND displays a static map orientated with respect to the true North. The displayed map information is the same as in ARC or ROSE-NAV mode but the map is centered on a map reference point. This point is chosen by the pilot on his MCDU and can be:
 -either the active waypoint - or any other selected waypoint of the flight plan. The scale of the map is that chosen by means of the range selector (the range value selected corresponding to the diameter of the outer circle). The GS, TAS and wind data, and the active waypoint data are displayed like in the other modes; but no navigation station characteristics and associated bearing pointers are available in this mode. The A/C position on the map is represented by a true track-orientated yellow A/C symbol (item b).
 1EFF : ALL 1 31-65-00Page A6 1 1 Aug 01/05 1 1 1CES 1

 H. Trafic Collision Avoidance System (TCAS) The TCAS provides data for the display of intruders or specific messages through a high-speed ARINC 429 bus.
 (1) Display of intruders
 (Ref. Fig. 049, 050)

 **ON A/C 001-049, 051-061, 101-103, 201-203,
 Intruders are displayed on the NDs in ROSE or ARC mode only for 10, 20 or 40 NM selected ranges.
R **ON A/C 001-049, 056-056, 058-058, 061-099, 101-149, 151-199, 201-299, R 301-399, 401-499, Post SB 31-1127 For A/C 001-049,056-056,058-058,061-061,101-103,201-203,
 Intruders are displayed on the NDs in ROSE or ARC mode.
 **ON A/C ALL
 With the ABOVE/BELOW option of the TCAS, only the intruders located
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 8(58)