Stall Warning Message
 Figure 014

R 1EFF : 001-049, 101-105, 151-199, 201-203, 1 34-13-00Page 49 1 1 Config-1 May 01/05 1 1 1CES 1 AIR DATA - DESCRIPTION AND OPERATION

____________________________________
 1.
 General

_______ The Air Data Reference (ADR) portion of the Air Data/Inertial Reference Unit (ADIRU) provides main data sources which are air data references for the aircraft avionics systems. The ADR receives and processes the outputs of the Air Data Modules (ADM) and other sensors (Ref. 34-11-00). It computes the aerodynamic parameters in the form of ARINC 429 low speed buses. For more details concerning the user systems, ref. 34-12-00.

 2.
 System Description

__________________
 A. ADR Operation
 (1) General The ADR software performs five basic computational elements which are under the air data calculations as follows:
 -pressure altitude functions (ALT/ALT rate)

 -Mach calculation (M)

 -airspeed calculation (CAS/TAS)

 -temperature calculation (SAT/TAT)
 - output signal processing.
 Aircraft-dependent calculations are also included in the operational
 software:

 -static source error correction

 -angle of attack (AOA)

 -maximum operating speed (MMO/VMO).
 The system tests include continuous in-flight monitoring and
 manually-activated test modes. The in-flight monitoring includes test
 of:

 -
input signal integrity

 -
input interface integrity

 -memory integrity

 -computational integrity
 - output signal integrity.
 The continuous monitoring detects and annunciates faults in the ADR
 during normal operation.
 Faults are stored in BITE history in Non Volatile Memory (NVM) and
 sent to the Centralized Fault Display System (CFDS) via digital
 words.

R 1EFF : 051-099, 106-149, 204-299, 301-399, 1 34-13-00Page 1 1401-499, 1Config-3 Aug 01/05 1 1 1CES 1R **ON A/C 051-099, 106-149, 204-299, 301-399,

 (2) Inputs
 (a) Digital inputs
 1 Air Data Modules (ADM) inputs
_ The ADR receives three input bus from its corresponding ADM. These buses transmit the following input data words depending on the ADM installation: Label 242 : Total Pressure Label 176 : Left Static Pressure Label 177 : Right Static Pressure Label 245 : Averaged Static Pressure Each of these words is a 32-bit word with the following format:
 ----------------------------------------------------------| BIT POSITION | DATA | ----------------------------------------------------------| 1 - 8 | Label | | 9 - 10 | SDI | | 11 - 28 | Pressure Value | | 29 | Sign bit (0 = positive) | | 30 - 31 | Status matrix | | 32 | Parity bit | ----------------------------------------------------------
ADM Input Label
 These data words are output on all eight Air Data output data buses and used for calculation of corrected pressure data.
 2 Flight Control Unit (FCU) inputs
_ The ADR receives one input bus from the FCU, for digital baro corrections. The FCU output bus sends:
 BCD label 234 Baro Correction 1(hPa) for CAPT side
 BCD label 236 Baro Correction 2(hPa) for F/O side. Each ADR receives the two FCU output bus according to the discrete selection as explained in Para. 2.A.(2)(c) (discrete inputs). Each of these words is a 32-bit BCD word with the following format:
 1EFF : 051-099, 106-149, 204-299, 301-399, 1 34-13-00Page 2 1 1 Config-3 Aug 01/05 1 1 1CES 1

 -----------------------------------------------------------
| BIT POSITION | DATA | -----------------------------------------------------------
| 1 - 8 | Label | | 9 - 10 | SDI | | 11 - 28 | Value | | 29 | Sign bit | | 30 - 31 | Status matrix | | 32 | Parity | -----------------------------------------------------------
FCU Input Label
 3_ Centralized Fault Display Interface Unit (CFDIU) input For maintenance purposes, the ADR receives one input bus from the CFDIU. For more details, ref. 34-18-00.
 4_ Air Data Reference (ADR) input Each ADR receives two intercommunication buses from the other ADRs for cross channel comparison purpose. 
R  **ON A/C 401-499, 
R  (2) Inputs 
R  (a) Digital inputs 
R R R R R R R R R R  1_  Air Data Modules (ADM) inputsThe ADR receives three input bus from its corresponding ADM. These buses transmit the following input data words depending on the ADM installation: Label 242 : Total Pressure Label 176 : Left Static Pressure Label 177 : Right Static Pressure Label 245 : Averaged Static Pressure Each of these words is a 32-bit word with the following format: 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航1(130)