R **ON A/C 051-099,
R 121VU COM NAV/RADAR/2 5SQ2 K14
R **ON A/C ALL
FOR 7DA1, 8DA1 49VU ANTI ICE/PROBES/AOA/1 4DA1 D04 49VU ANTI ICE/PROBES/PHC/1 2DA1 D03 49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13 122VU ANTI ICE/PROBES/1/TAT 1DA1 Z12
FOR 7DA2, 8DA2 122VU ANTI ICE/PROBES/2/TAT 1DA2 Y15 122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14 122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13 122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12 122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
FOR 7DA3, 8DA3 122VU ANTI ICE/PROBES/PHC/3 2DA3 Y16 122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16 122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15 122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
1EFF : ALL 1 34-11-16Page 402 1 1 May 01/05 1 1 1CES 1 Subtask 34-11-16-010-050
B. Get Access
(1)
Put the access platform in position at the zone 128 for the static probes 7DA1, 8DA1, 7DA2 and 8DA2.
(2)
Put the access platform in position at the zone 120 for static probes 7DA3 and 8DA3.
(3)
Open the access door :
FOR 7DA1, 8DA1, 7DA2, 8DA2
824
FOR 7DA3, 8DA3
811
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 229-230,
(Ref. Fig. 401/TASK 34-11-16-991-001) R **ON A/C 106-149, 221-228, 231-299, 301-399, 401-499,
(Ref. Fig. 401A/TASK 34-11-16-991-001-A) R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 229-230,
Subtask 34-11-16-020-050
A. Removal of the Static Probe
NOTE : This procedure is the same for the six static probes.
____
(1)
Remove the covers (12).
(2)
Remove the two nuts (8), the washers (10) and the bolts (11).
(3)
Disconnect the nut (1) and remove the static line (13).
(4)
Put a blanking plug on the nut (1).
(5)
Remove the union (2).
1EFF : ALL 1 34-11-16Page 403 1 1 Aug 01/05 1 1 1CES 1
Static Probe
Figure 401/TASK 34-11-16-991-001
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-11-16Page 404 1201-220, 229-230, 1Aug 01/05 1 1 1CES 1
Static Probe
Figure 401A/TASK 34-11-16-991-001-A
R 1EFF : 106-149, 221-228, 231-299, 301-399, 1 34-11-16Page 405 1401-499, 1Aug 01/05 1 1 1CES 1
(6)
Remove the packing (4) and discard it.
(7)
Remove the four nuts (3).
(8)
Remove the static probe (5).
(9)
Remove the packing (6) and discard it.
(10) Keep the bolts (7). R **ON A/C 106-149, 221-228, 231-299, 301-399, 401-499,
Subtask 34-11-16-020-050-A
A. Removal of the Static Probe NOTE : This procedure is the same for the six static probes.
____
(1)
Remove the covers (12).
(2)
Remove the two nuts (8), the washers (10) and the bolts (11).
(3)
Disconnect the nut (1) and remove the static line (13).
(4)
Put a blanking plug on the nut (1).
(5)
Remove the union (2).
(6)
Remove the packing (4) and discard it.
(7)
Remove the four nuts (3).
(8)
Remove the washer (16) and the bonding strip (15).
(9)
Remove the static probe (5).
(10)
Remove the packing (6) and discard it.
(11)
Keep the bolts (7).
1EFF : ALL 1 34-11-16Page 406 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 34-11-16-400-002 Installation of the Static Probe (7DA1,7DA2,7DA3,8DA1,8DA2,8DA3) WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
CAUTION : MAKE SURE THAT:
_______
-
THERE IS NO SIGN OF CORROSION OR DAMAGE ON THE EQUIPMENT
-
THERE IS NO FOREIGN OBJECT IN THE EQUIPMENT TO PREVENT ANY DAMAGE IN THE SYSTEM.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.6 m (5 ft. 3 in.) R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft)
B. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航1(78)
