3. Job Set-up
__________
Subtask 34-13-00-860-070
A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
1EFF : ALL 1 34-13-00Page 525 1 1 May 01/01 1 1 1CES 1 Subtask 34-13-00-010-059
B. Get Access
(1)
Put the access platform in position at the access door 822.
(2)
Open the access door 822
(3)
On the battery power center 105VU:
-loosen the two screws and remove the protective cover
Subtask 34-13-00-865-068
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09 49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07 49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
**ON A/C 001-049, 051-061, 101-105, 201-203,
121VU ADIRS/ADIRU/2PWR/SHED 10FP N11 121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10 121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09 121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08 121VU ADIRS/ADIRU/2/115VAC 4FP2 N07 121VU ADIRS/ADIRU/3/115VAC 4FP3 N06 121VU ADIRS/ADIRU/2/28VDC 6FP2 N05 121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
121VU ADIRS/ADIRU/2PWR/SHED 10FP N10 121VU ADIRS/ADIRU/3PWR/SWTG 9FP N09 121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N08 121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N07 121VU ADIRS/ADIRU/2/115VAC 4FP2 N06 121VU ADIRS/ADIRU/3/115VAC 4FP3 N05 121VU ADIRS/ADIRU/2/28VDC 6FP2 N04 121VU ADIRS/ADIRU/3/28VDC 6FP3 N03
1EFF : ALL 1 34-13-00Page 526 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 34-13-00-865-075
D. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01 121VU AUTO FLT/FAC2/28VDC 5CC2 M19
**ON A/C ALL
Subtask 34-13-00-860-072
E. Aircraft Maintenance Configuration
(1)
Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(2)
on the center pedestal, on the MCDU, get the SYSTEM REPORT/TEST/NAV page (Ref. TASK 31-32-00-860-010).
(3)
Put the safety barriers in position around the RAT area.
4. Procedure
_________
Subtask 34-13-00-710-055
A. Operational Test of the CAS DYNAMIC SLEW TEST NOTE : This test is for the system 1. For the other system(s), use the
____
indications between the parentheses.
NOTE : This test is an example of the CAS ramp test. Ignore the warnings
____
which are the result of an overspeed.
1EFF : ALL 1 34-13-00Page 527 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
1. On one MCDU: On the MCDU:
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
OUTPUT TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TESTS
SLEW TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) CAS DYNAMIC
the CAS DYNAMIC SLEW SLEW page comes into view.
indication.
- on the keyboard, enter these - the slew limits set come into view
limits: 175/225 and push the below the related indication.
line key adjacent to the CAS
LIMITS (FT) indication.
- on the keyboard, enter this - the slew rate comes into view below
slew rate: 0020 and push the the related indication.
line key adjacent to the CAS
SLEW RATE (FT/MIN) indication.
- push the line key adjacent to On the CAPT and F/O PFDs:
the UP-START SLEW indication. - the speed scale moves from 175 Kts to
225 Kts.
The warnings above stop.
5. Close-up________
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航1(157)
