1. Reason for the Job
__________________
 This Task gives the APU build-up of the APU (4005KM) (GTCP 36-300) ready for installation in the aircraft. NOTE : Items under paragraph 2.C. Expendable Parts include all items
____ necessary for the APU build-up, not only expendable parts.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00
 to 75.00 lbf.ft) FRDH141 1 ADAPTER - TORQUE 98D49207527000 1 SUPPORT FRAME - APU

 B.
 Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 03-002 GB DEF-STAN 91-101
 LUBRICATING OIL TURBINE ENGINE SYNT BASE
 (Ref. 20-31-00) Material No. 07-020 AI TNA 007-10012
 IDENTIFICATION PAINT (Ref. 20-31-00) Material No. 07-560
 SECURING LACQUER (Ref. 20-31-00) Material No. 11-004 USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00) Material No. 19-010 USA AMS 5687
 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
 (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
0 Auxiliary Power Unit 49-11-04 01 -001C 1 bolts 49-11-04 01 -070 2 rear APU mount-bracket 49-11-04 01 -060 3 FWD APU mount-bracket (LH) 49-11-04 01 -040 4 washer 49-11-04 01 -100 5 nut 49-11-04 01 -120 7 nut 49-11-04 01 -110 8 setscrew 49-11-04 01 -090 9 FWD APU mount-bracket (RH) 49-11-04 01 -050 21 generator 24-23-04 01 -010B 21 generator 24-23-04 01 -010C 21 generator 24-23-04 01 -010D 21 generator 24-23-04 01 -010E 22 preformed packing 24-23-04 01 -010B 22 preformed packing 24-23-04 01 -010C 22 preformed packing 24-23-04 01 -010D 22 preformed packing 24-23-04 01 -010E 23 seal plate 24-23-04 01 -040 24 nuts 24-23-04 01 -020A 25 seal 24-23-04 01 -010B 25 seal 24-23-04 01 -010C

 -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
25  seal  24-23-04 01 -010D
 25  seal  24-23-04 01 -010E
 26  countersunk screws  24-23-04 01 -030
 41  compartment-cooling duct  49-52-04 30 -150A
 42  bolt  49-52-04 30 -160A
 43  washer  49-52-04 30 -170A
 D. Referenced Information
 ------------------REFERENCE  -------------------------------DESIGNATION ------------------------------

-------------------------------------------------------------------------------
49-11-11-400-001 Installation of the Auxiliary Power Unit (APU) -
4005KM (GTCP 36-300) 49-11-11-991-021 Fig. 201 49-11-11-991-015 Fig. 202 49-11-11-991-016 Fig. 203 49-11-11-991-019 Fig. 204
 3. Job Set-up
__________ Subtask 49-11-11-941-054
 A. Preparation for Build-up
 (1)
 Remove the Auxiliary Power Unit (0) from the transport container.

 (2)
 Install the APU on the SUPPORT FRAME - APU (98D49207527000). (Ref. Fig. 201/TASK 49-11-11-991-021)

 APU on Support Frame
 Figure 201/TASK 49-11-11-991-021

 CES  4. Procedure

_________
 Subtask 49-11-11-420-064
 A. Installation of the APU Mount-Brackets
 (1)
 Installation of the FWD left (4065KM) and the FWD right (4075KM) APU mount-brackets. (Ref. Fig. 202/TASK 49-11-11-991-015)

 (a)
 Carefully put the FWD APU mount-bracket (LH) (3) and the FWD APU mount-bracket (RH) (9) in position. Make sure that the spigot is correctly engaged in the APU.

 (b)
 Install the bolts (1) at each of the mount-brackets.

 (c)
 TORQUE the bolts (1) to between 2.6 and 3.0 m.daN (19.17 and

 22.12 lbf.ft). Safety the bolts (1) with MISCELLANEOUS (Material No. 19-010).

 (d)
 Install one setscrew (8) at each of the FWD APU mount-brackets
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 機載輔助動力 AIRBORNE AUXILIARY POWER2(18)