- XCVR-HF, 2 (3RE2)
- ANTENNA-HF (5RE)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-11-00-740-001 Bite Test of the HF System
AMM 23-11-11-000-001 Removal of the HF Antenna (5RE)
AMM 23-11-11-400-001 Installation of the HF Antenna (5RE)
AMM 23-11-33-000-001 Removal of the HF Transceiver (3RE1, 3RE2)
AMM 23-11-33-400-001 Installation of the HF Transceiver (3RE1, 3RE2)
AMM 23-11-36-000-001 Removal of the HF Antenna Coupler
AMM 23-11-36-400-001 Installation of the HF Antenna Coupler
ASM 23-11/02
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the HF system (Ref. AMM TASK 23-11-00-740-001).
NOTE : Do this test for the HF 2 only.
____
4. Fault Isolation
_______________
**ON A/C 001-049, 101-105, 151-199,
A. If the test gives the maintenance message
HF2 ANTENNA (5RE)/FEEDER (6RE2)/CPLR (4RE2)/COAX:
- replace the COUPLER-HF, 2 (4RE2) (Ref. AMM TASK 23-11-36-000-001) and (Ref. AMM TASK 23-11-36-400-001).
(1) If the fault continues:
- replace the XCVR-HF, 2 (3RE2) (Ref. AMM TASK 23-11-33-000-001) and (Ref. AMM TASK 23-11-33-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞23-11-00∞∞∞∞∞∞∞∞∞∞Page 210
201-210, 301-399, 401-499, Aug 01/05 CES (2) If the fault continues:
- do a check of the wiring from the HF 2 coupler (4RE2): . to the ground:
* 4RE2 pins A/G, D
. to the HF 2 transceiver (3RE2):
* 4RE2 pins A/A, L to 3RE2 pins AC/9, 1
* 4RE2 pins A/B, c to 3RE2 pins AB/4E, 4F
* 4RE2 pin B to 3RE2 pin AB/C (coaxial) (Ref. ASM 23-11/02).
(a) If there is no continuity:
- repair the related wiring.
(b) If there is continuity:
- do a check and repair the wiring between the HF 2 coupler (4RE2) and the HF antenna (5RE) (Ref. ASM 23-11/02).
1 If there is no continuity:
_ - repair the above wiring.
2 If there is continuity:
_
- replace the ANTENNA-HF (5RE), (Ref. AMM TASK 23-11-11-000-001) and (Ref. AMM TASK 23-11-11-400-001).
R **ON A/C 051-099, 201-210, 301-399, 401-499,
A. If the test gives the maintenance message
HF2 (3RE2) /COAX:
- replace the COUPLER-HF, 2 (4RE2), (Ref. AMM TASK 23-11-36-000-001) and (Ref. AMM TASK 23-11-36-400-001).
(1) If the fault continues:
- replace the XCVR-HF, 2 (3RE2), (Ref. AMM TASK 23-11-33-000-001) and (Ref. AMM TASK 23-11-33-400-001).
(2) If the fault continues:
- do a check of the wiring from the HF 2 coupler (4RE2) . to the ground:
* 4RE2 pins A/G, D
. to the HF 2 transceiver (3RE2):
* 4RE2 pins A/A, L to 3RE2 pins AC/9, 1
* 4RE2 pins A/B, c to 3RE2 pins AB/4E, 4F
* 4RE2 pin B to 3RE2 pin AB/C (coaxial) (Ref. ASM 23-11/02).
(a) If there is no continuity:
- repair the related wiring.
(b) If there is continuity:
- do a check and repair the wiring between the HF 2 coupler (4RE2) and the HF antenna (5RE) (Ref. ASM 23-11/02).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞23-11-00∞∞∞∞∞∞∞∞∞∞Page 211
201-210, 301-399, 401-499, Aug 01/05 CES 1 If there is no continuity:
_
- repair the above wiring.
2 If there is continuity:
_
- replace the ANTENNA-HF (5RE), (Ref. AMM TASK 23-11-11-000-001) and (Ref. AMM TASK 23-11-11-400-001).
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499,
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞23-11-00∞∞∞∞∞∞∞∞∞∞Page 212
201-210, 301-399, 401-499, Aug 01/05 CES
R **ON A/C ALL
TASK 23-11-00-810-807
Continuous Transmission of the HF 1 Transceiver for more than 60 s
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊1(45)
