TASK 23-13-00-810-820
 Loss of the Data from the RMP 3 to the RMP 2
 1. Possible Causes
_______________
 - RMP-COM/NAV FREQ SEL, 2 (1RG2)

 - wiring

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 23-13-00-740-001 BITE Test of the Radio Management AMM 23-13-13-000-001 Removal of the Radio Management Panel (CRMP) (1RG1, 1RG2, 1RG3) AMM 23-13-13-400-001 Installation of the Radio Management Panel (CRMP) (1RG1, 1RG2, 1RG3) ASM 23-13/01
 3. Fault Confirmation
__________________
 A. Job Set-up On the RMP 2 and RMP 3 only, make sure that the ON/OFF switches are at ON.
 B. Test
 (1) Do the BITE test of the Radio Management (Ref. AMM TASK 23-13-00-740-001).
 NOTE : Do this test for the RMP 2 only.
____
 _______________

4. Fault Isolation
R **ON A/C 001-049, 051-061, 101-105,
 A. If the test gives the maintenance message RMP 2 : NO DATA FROM RMP 3:
 - replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 (1) If the fault continues:
 - do a check and repair the wiring of the DIALOGUE INPUT signal, (from RMP 2 (1RG2) pins A/<X, <Y to the first terminal block) (Ref. ASM 23-13/01).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞23-13-00∞∞∞∞∞∞∞∞∞∞Page 223
 May 01/05 CESR **ON A/C 062-099, 106-149, 151-199, 201-299, 301-399, 401-499,

 A. If the test gives the maintenance message RMP3(1RG3)/RMP2(1RG2):
 - replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 (1) If the fault continues:
 - do a check and repair the wiring of the DIALOGUE INPUT signal, (from RMP 2 (1RG2) pins A/<X, <Y to the first terminal block) (Ref. ASM 23-13/01).
 **ON A/C ALL
 B. Do the test given in Para. 3.B.

 TASK 23-13-00-810-821

 Loss of the Data from the RMP 1 to the RMP 3
 1. Possible Causes
_______________
 - RMP-COM FREQ SEL, 3 (1RG3)

 - wiring

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 23-13-00-740-001 BITE Test of the Radio Management AMM 23-13-13-000-001 Removal of the Radio Management Panel (CRMP) (1RG1, 1RG2, 1RG3) AMM 23-13-13-400-001 Installation of the Radio Management Panel (CRMP) (1RG1, 1RG2, 1RG3) ASM 23-13/01
 3. Fault Confirmation
__________________
 A. Job Set-up On the RMP 1 and RMP 3 only, make sure that the ON/OFF switches are at ON.
 B. Test
 (1) Do the BITE test of the Radio Management (Ref. AMM TASK 23-13-00-740-001).
 NOTE : Do this test for the RMP 3 only.
____
 4. Fault Isolation
_______________
R **ON A/C 001-049, 051-061, 101-105,
 A. If the test gives the maintenance message RMP 3 : NO DATA FROM RMP 1:
 - replace the RMP-COM FREQ SEL, 3 (1RG3) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 (1) If the fault continues:
 - do a check and repair the wiring of the DIALOGUE INPUT signal, (from RMP 3 (1RG3) pins A/<X, <Y to the first terminal block) (Ref. ASM 23-13/01).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞23-13-00∞∞∞∞∞∞∞∞∞∞Page 225
 May 01/05 CES

R **ON A/C 062-099, 106-149, 151-199, 201-299, 301-399, 401-499,

 A. If the test gives the maintenance message RMP1(1RG1)/RMP3(1RG3):
 - replace the RMP-COM FREQ SEL, 3 (1RG3) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
 (1) If the fault continues:
 - do a check and repair the wiring of the DIALOGUE INPUT signal, (from RMP 3 (1RG3) pins A/<X, <Y to the first terminal block) (Ref. ASM 23-13/01).
 **ON A/C ALL
 B. Do the test given in Para. 3.B.

 TASK 23-13-00-810-822

 Loss of the Data from the RMP 2 to the RMP 3
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊1(79)