R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499,
TASK 23-11-00-810-820
Loss of the BUS 2 Data from the CFDIU to the HF 2
1. Possible Causes
_______________
- XCVR-HF, 2 (3RE2)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-11-00-740-001 Bite Test of the HF System
AMM 23-11-33-000-001 Removal of the HF Transceiver (3RE1, 3RE2)
AMM 23-11-33-400-001 Installation of the HF Transceiver (3RE1, 3RE2)
ASM 31-32/03
3. Fault Confirmation
__________________
A. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU CFDS/CFDIU/SPLY 2TW J18 R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499, Post SB 31-1163 For A/C 155-156,208-209,
121VU CFDS/CFDIU/BACK/UP 8TW J17 R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499,
B. Test Do the BITE test of the HF system (Ref. AMM TASK 23-11-00-740-001).
NOTE : Do this test for the HF 2 only.
____
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞23-11-00∞∞∞∞∞∞∞∞∞∞Page 243
201-210, 301-399, 401-499, Aug 01/05 CES
4. Fault Isolation
_______________
**ON A/C 001-049, 101-105, 151-199,
A. If the test gives the maintenance message HF 2 NO DATA FROM CFDIU:
- replace the XCVR-HF, 2 (3RE2) (Ref. AMM TASK 23-11-33-000-001) and (Ref. AMM TASK 23-11-33-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the BUS 2 OUTPUT signal,(from the HF 2 transceiver (3RE2) pins AB/4A, 4B to the first terminal block)(Ref. ASM 31-32/03).
R **ON A/C 051-099, 201-210, 301-399, 401-499,
A. If the test gives the maintenance message CFDIU (1TW)/HF2 (3RE2):
- replace the XCVR-HF, 2 (3RE2) (Ref. AMM TASK 23-11-33-000-001) and (Ref. AMM TASK 23-11-33-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the BUS 2 OUTPUT signal (from the HF 2 transceiver (3RE2) pins AB/4A, 4B to the first terminal block)(Ref. ASM 31-32/03).
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499,
B. Do the test given in Para. 3.B.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞23-11-00∞∞∞∞∞∞∞∞∞∞Page 244
201-210, 301-399, 401-499, Aug 01/05 CES
**ON A/C ALL
TASK 23-11-00-810-821
Loss of the HF 1 Antenna Coupler Function
1. Possible Causes
_______________
- COUPLER-HF, 1 (4RE1)
- ANTENNA-HF (5RE)
- feedline
- HF 1 feeder (6RE1)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 20-28-00-912-005 Electrical Bonding of Antennas With Conductive Bolts. AMM 23-11-00-740-001 Bite Test of the HF System AMM 23-11-11-000-001 Removal of the HF Antenna (5RE) AMM 23-11-11-400-001 Installation of the HF Antenna (5RE) AMM 23-11-36-000-001 Removal of the HF Antenna Coupler AMM 23-11-36-400-001 Installation of the HF Antenna Coupler ASM 23-11/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the HF system (Ref. AMM TASK 23-11-00-740-001).
NOTE : Do this test for the HF 1 only.
____
4. Fault Isolation
_______________
R **ON A/C 001-049, 101-105, 151-199,
A. If the test gives the maintenance message HF1 CPLR (4RE1):
- replace the COUPLER-HF, 1 (4RE1) (Ref. AMM TASK 23-11-36-000-001) and (Ref. AMM TASK 23-11-36-400-001).
(1) If the fault continues:
- remove the HF 1 coupler
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊1(55)
