曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 4.  Aft Sill Drain Bladder Assembly Removal (Fig. 402)_______________________________________
 A. References
 (1) AMM 25-27-21/401, Entry and Service Area Floor Covering Removal
 B. Access
 (1)  Location Zone 145 Aft Cargo Compartment Equipment Bay - Left
 C. Prepare for the Removal
 S 424-004
 (1)  To remove the floor panel to get access to the aft drain bladder assembly, do this task: Entry and Service Area Floor Covering Removal (AMM 25-27-21/401).
 D. Aft Sill Drain Bladder Assembly Removal
 S 024-027
 (1)  Loosen the clamp (37) to disconnect the hose from the outlet of the aft drain bladder assy (35).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES POST-SB 54-1192 ú

 38-31-31
 AIRPLANES POST-PRR 35363  ú ú 01 Page 405 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

AFT ENTRY DOOR

A

Aft Bladder Assembly Installation
Figure 402 (Sheet 1)

G99085
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES POST-SB 54-1192 ú

 38-31-31
 AIRPLANES POST-PRR 35363  ú ú 01 Page 406 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
CLAMP (2 LOCATIONS)

 A-A

Aft Bladder Assembly Installation
Figure 402 (Sheet 2)

G99092
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES POST-SB 54-1192 ú

 38-31-31
 AIRPLANES POST-PRR 35363  ú ú 01 Page 407 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 024-028
 (2)  
Loosen the clamp (33) to disconnect the line from the inlet of the aft drain bladder assembly (35).

 S 024-029

 (3)  
Remove the screws (31) and washers (32) to disconnect the plate assembly (36) from the structure.

 S 024-030

 (4)  
Loosen the clamp (38) to remove the cap assembly (34) from the aft drain bladder assy (35).

 S 024-031

 (5)  
Remove the bolts (39), washers (40), countersunk washers (43), and nuts (42) that attach the aft drain bladder assy (35) to the plate assembly (36).

 S 024-035

 (6)  
Remove the plate adapter (41) and the forward drain bladder assy (35).

 TASK 38-31-31-404-047
 5. Aft Sill Drain Bladder Assembly Installation (Fig. 402)
____________________________________________
 A. References
 (1)  AMM 25-27-21/401, Entry and Service Area Floor Covering Installation
 B. Consumable Materials
 (1)  
A00027 Sealant, RTV - BAC 5010, Type 60

 (2)  
A00247 Sealant, Pressure and Environmental-Chromate Typ - BMS5-95

 C. Access
 (1)  Location Zones
 (a)  191 Forward Wing-to-Body Fairings, Left
 D. Aft Sill Drain Bladder Assembly Installation
 S 394-032
 (1)  
Apply a fay surface seal with sealant, BMS5-95 between the plate assembly (36) and the plate adapter (41).

 S 384-033

 (2)  
Put the plate adapter (41) in its position on the plate assembly (36) with the bolt holes aligned.

 S 394-034

 (3)  
Apply a fay surface seal with sealant, BAC 5010, Type 60 between plate assembly (36) and the aft drain bladder assy (35).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES POST-SB 54-1192 ú

 38-31-31
 AIRPLANES POST-PRR 35363  ú ú 01 Page 408 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 WATER AND WASTE(31)