(3)
Remove the mats from the inlet cowl.
S 032-121-C00
(4)
If no other maintenance is necessary, remove the DO-NOT-OPERATE tag from the start lever.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-03
ALL ú ú C02 Page 239 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
POWER PLANT - MAINTENANCE PRACTICES (ENGINE AND MODULE/TRANSPORTATION)
______________________________________________________________________
1. General
_______
A. This procedure gives the instructions and the necessary conditions that
apply when you move an engine or one of its modules in the equipment
configuration.
(1) A transportation base and cradle that is approved for transportation of an engine by CFMI.
NOTE: The transportation stand and cradle will also be refered to
____
as a shipping stand in this procedure.
(2) An engine module must be moved in a module shipping container that is approved by CFMI.
TASK 71-00-04-502-001-C00
2. Engine Transportation
_____________________
A. Equipment
(1)
Stand, Shipping - CFMI Approved
B.
In-Plant Transportation
S 512-024-C00
(1) These are the minimum attach points that are necessary to move the CFM56-3 engine in the shipping stand.
(a)
the two attach points on the fan case
(b)
a minimum of one of the two attach points on the turbine case.
S 512-016-C00
CAUTION: THE SHIPPING STAND MUST BE MADE TO THE CFMI SPECIFICATIONS.
_______ THIS WILL MAKE SURE THERE IS PROTECTION FROM SHOCKS AND VIBRATION LOADS THAT CAN OCCUR WHEN YOU MOVE AN ENGINE.
(2) Use the correct shipping stand.
S 512-017-C00
WARNING: DURING TRANSPORTATION DO NOT LIFT THE TRANSPORTATION
_______ STAND/CRADLE ASSEMBLY WITH ITS HOIST POINTS IF A POWER PLANT IS INSTALLED ON IT. THESE HOIST POINTS ARE USED ONLY TO LIFT AN EMPTY TRANSPORTATION STAND/CRADLE ASSEMBLY. INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT CAN OCCUR.
CAUTION: YOU MUST OBEY THE INSTRUCTIONS AND NECESSARY CONDITIONS THAT
_______
FOLLOW OR ENGINE DAMAGE CAN OCCUR.
(3) If you do not obey the instructions and necessary conditions that follow, you must speak to CFMI for the correct procedure for the engine.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-04
ALL ú ú C01 Page 201 ú Jul 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 512-018-C00
CAUTION:_______BE CAREFUL WHEN YOU MOVE AN ENGINE. IF YOU APPLY G LOADS THAT ARE TOO HIGH, ENGINE DAMAGE CAN OCCUR.
(4)
When you move an engine at a speed of less than 0.5 mph (0.8 km/hr):
(a)
There are no special conditions or limits.
S 512-005-C00
(5)
When you move an engine at a speed of 0.5-3.0 mph (0.8-4.8 km/hr):
(a)
The vehicle must have wheels that are spring-loaded with shock absorbers.
(b)
The vehicle must have pneumatic tires or tires made of a soft, flexible material.
S 512-006-C00
(6)
When you move an engine at a speed of 3.0-5.0 mph (4.8-8.0 km/hr):
(a)
The vehicle must have a system that absorbs shocks and vibrations that have frequencies of 15 Hz and higher.
C.
Highway Transportation
S 512-019-C00
CAUTION: THE SHIPPING STAND MUST BE MADE TO THE CFMI SPECIFICATIONS.
_______ THIS WILL MAKE SURE THERE IS PROTECTION FROM SHOCKS AND VIBRATION LOADS THAT CAN OCCUR WHEN YOU MOVE AN ENGINE.
(1) Use the correct shipping stand.
S 512-020-C00
WARNING: DURING TRANSPORTATION DO NOT LIFT THE TRANSPORTATION
_______ STAND/CRADLE ASSEMBLY WITH ITS HOIST POINTS IF A POWER PLANT IS INSTALLED ON IT. THESE HOIST POINTS ARE USED ONLY TO LIFT AN EMPTY TRANSPORTATION STAND/CRADLE ASSEMBLY. INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT CAN OCCUR.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 動力裝置 POWER PLANT 1(167)
