(3) You must do the Fan Blade Inspection (With Blades Removed) if you find the conditions that follow:
(a) Seized blade tip(s) in the fan case abradable shroud.
1) Release the blade tip(s) with your hand with movement of
the tip(s) in the forward and circumferential direction. 2) Examine the abradable shroud for damage (AMM 72-33-00/601). 3) Turn the rotor with your hand to make sure the rotor turns
freely.
NOTE: Light pressure from the internal seals and shrouds
____
is usual.
(b)
Signs of fan blade shingling.
1) A maximum service extension of 50 cycles is permitted if the condition is not more than the limits for shingled mid-span shrouds.
(c)
Signs of unusual conditions in the fan.
S 226-005-C00
(4) Examine the areas of the installed fan blades (Fig. 601) for the conditions that follow:
NOTE: If it is necessary to remove the fan blades, use par. 3
____
to examine the fan blades.
(a) Platform (does not include fillet):
1) There is no limit on the quantity of nicks, dents and scratches if: a) The damage is not more than 0.02 inch (0.5 mm) in
depth. b) The scratches are not more than 0.4 inch (10.0 mm) in length. 2) Cracks or tears are not serviceable.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú C01 Page 602 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEE
S-M56-MM-1716-(1)-00-B Fan Rotor Blade Inspection
Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú C01 Page 603 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
EACH DOVETAIL PRESSURE FACE IS LAYERED WITH Cu-Ni-In (YELLOW COLOR) AS A BASE. THE MOLYDAG (GRAY COLOR) IS LAYERED OVER THE Cu-Ni-In.
TIP CURL
C
NOTE: DIMENSIONS ARE IN INCHES WITH MILLIMETERS IN PARENTHESES.
S-M56-MM-00855-00-B
Fan Rotor Blade Inspection
Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú C01 Page 604 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(b)
Fillet radius:
1) Nicks, dents, scratches, cracks, and tears are not
serviceable.
(c)
Root area: 1) There is no limit on the quantity of nicks and dents on the leading edge if not more than 0.015 inch (0.4 mm) in depth.
2) There is no limit on the quantity of nicks, dents and
scratches on the contour surface as follows:
a) The damage is not more than 0.003 inch (0.08 mm) in
depth. b) The scratches are not more than 0.4 inch (10.0 mm) in length. 3) Cracks, tears and distortion on the full root area are not serviceable.
(d) Leading edge (does not include fillet and root area):
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 1(143)
