(2)
The second procedure cleans the engine gas path with a detergent wash and also a water wash.
TASK 72-00-00-117-001-C00
2. Clean the Fan Blade
___________________
A. Equipment
(1) Protective mat (two are necessary) - Rubber Manufacturer's
Association, Grade SC43, neoprene sponge, 1 inch thick,
approximately 3 x 4 feet with warning streamers attached.
B. Consumable Materials
(1)
Scotch-Brite, Type ACFS (CP2240)
(2)
Scotch-Brite, Type SCFS (CP2279) (optional to CP2240)
(3)
Cleaner, Gas Path - CP2800
C. References
(1)
AMM 71-11-02/201, Fan Cowl Panels
(2)
AMM 78-31-00/201, Thrust Reverser System
D. Access
(1) Location Zones
101/102 Control Cabin
506 Left Engine - Fan Blades
606 Right Engine - Fan Blades
E. Clean the fan blades.
NOTE: It is recommended that you do the fan blade cleaning procedure
____
and the gas path cleaning procedure at the same time.
S 867-003-C00
(1) Make sure the start levers are in the CUTOFF position.
(a) Install a DO-NOT-OPERATE tag.
S 497-004-C00
CAUTION: MAKE SURE THE EDGES OF THE MATS HAVE AN OVERLAP OR ARE ATTACHED
_______ WITH TAPE. DAMAGE TO THE INLET COWL SURFACE CAN OCCUR IF TOOLS OR OTHER UNWANTED OBJECTS FALL ON THE SURFACE.
(2)
Put the protective mats on the lower half of the interior surface of the inlet cowl.
(3)
Open the left (right) fan cowl panel (AMM 71-11-02/201).
S 017-005-C00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-00-00
ALL ú ú C01 Page 701 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 017-006-C00
WARNING: OBEY THE INSTRUCTIONS IN THE PROCEDURE TO OPEN THE THRUST
_______ REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS WHEN YOU OPEN THE THRUST REVERSERS, INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT CAN OCCUR.
(4) Open the left (right) thrust reversers (AMM 78-31-00/201).
S 117-007-C00
WARNING:_______USE THE RUBBER GLOVES WHEN YOU TOUCH THE SOLVENT. SKIN IRRITATION CAN OCCUR IF YOU TOUCH THE SOLVENT BEFORE IT IS MIXED.
THE CLEANER IS FLAMMABLE. OBEY THE PRECAUTIONS AGAINST FIRE. IF YOU DO NOT OBEY THE PRECAUTIONS, INJURIES TO PERSONS CAN OCCUR.
(5) Prepare the solution to clean fan blades as follows:
(a) Mix a solution of 20 percent gas path cleaner and 80 percent
water.
S 117-008-C00
CAUTION:_______DO NOT LET THE SOLUTION SPRAY INTO THE GAS PATH. HOT CORROSION CAN CAUSE DAMAGE TO EQUIPMENT.
(6) Use a spray gun and apply the solution to the two sides of the blades at the 6 o'clock position from the inlet and fan exit.
NOTE: This will decrease the amount of solution that touches the
____ blade dovetails. The solution will remove the lubricant. If you wipe the blades, do it in the down direction away from the rotor.
S 117-009-C00
(7) Remove the small deposits from the blades with a soft cloth which is moist with the solution.
(a) Flush the blades with water.
S 117-010-C00
(8)
Remove the hard-to-remove particles from the blades with a Scotch-Brite pad which is moist with the solution.
(a) Flush the blades with water.
(9)
Remove the protective mat from the engine inlet.
S 097-011-C00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-00-00
ALL ú ú C01 Page 702 ú Mar 15/96
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 1(65)
