曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

type rating and at least 150 hours of flying
experience as pilot on Airbus 320, 330, 340.
ground training
The Ground Training consists of the following course elements:
technical training
Conducted through Web Based Training (CBT).
Covers the Aeroplane systems. It complies with the
requirements of theoretical knowledge instruction
stated in AMC FCL 1.261(a) and covers systems’ description
and description of operational procedures.
The CBT course contains approximately 40 hours of
instruction; duration 8 days.
An instructor is available for support during all CBT
lessons. A cockpit mock-up (Paper Tiger) is available
for familiarisation with the cockpit layout and the
locations of the controls and indicators.
In addition to the ‘paper tiger’, the trainees will also
have access to an FMGS training software available
on OAA controlled training tools. There will also be
3 designated instructor lead review sessions slotted
between the CBT sessions.
The web based course offers a comprehensive
instructor led introduction, review and knowledge
assessment during the first day at the OAA training
centre.
performance, mass & balance
The performance course is the part of the theoretical
knowledge instruction, which is covered by means of
classroom instruction.
It comprises explanation of tables and charts used
for performance calculations as well as exercises.
The duration of this element is 1½ days.
standard operating procedures (sop)
In preparation for the practical training, a course element
is included which explains the standard operating
procedures to be applied. In principle these are
the Airbus prescribed SOPs, however customer SOPs
can also be applied, if so requested. The duration of
this element is 1 day.
theory examination is a supervised, closed
book, written test containing 100 multiple-choice
questions, covering all main subjects in the syllabus.
The pass mark is 75% in each of the main subjects.
The duration of the examination is 3 hours.
otd (other training device) Training, is
used to familiarise the trainee with the controls
and indicators in the simulated cockpit and acquire
the necessary understanding and skill to enter the
flight simulator training. As this training is done in a
simulated cockpit environment, it allows exercising
multi-crew aspects in all phases and circumstances.
Duration of this element is 2 sessions of 4 hours
each. There may be additional sessions scheduled
depending on the customer’s requirements.
Total duration - ground training: 13 days.
* At least 100 hrs. PIC is required if you come from a modular training background.
** MCC training can be integrated into the type-rating course. Pilots holding a valid helicopter MCC certificate + over 100 hrs ME
helicopter pilot experience or have more than 500 hrs ME helicopter experience meet the MCC requirement.
The Head of Training checks whether the above pre-requisites are complied with.
www.oaa.com 7
8 skills for flight
flight simulator training
Covers all procedures and manoeuvres and is completed
in a fully dynamic flight environment. The
duration is 9 sessions FFS and 1 session OTD, of 4
hours each. In preparation of each session a 1½ hour
briefing will be conducted. At the end of each session,
a de-briefing is conducted, including a session review
and a preparation for the next session.
licensing skill test
OAA will provide the examiner with the trainee’s
records folder, the completed application form and
a skill test form for each candidate. The type rating
application to the civil Aviation Authority needs to be
completed by each trainee.
options
low visibility procedures training
is an optional module that consists of approximately
3 hours of CBT and one 4-hour simulator training
session. The CBT explains the regulations and use
of equipment and procedures. The flight simulator
training covers take-off and landing operations down
to the certified minimum visibility limits.
zftt (zero flight time training)
is an optional flight simulator training session/s that
covers extra take-offs, circuits and landings required
to apply for the type rating without performing any
training in the aeroplane. ZFTT can only be performed
provided the requirements according to JARFCL
have been complied with.
aircraft training
If so desired by the customer, aircraft training can be
provided by OAA. As part of this course element, a
complete walk around check of the aeroplane is done
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料28(106)