曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Approvals TEST-FUCHS Erding
Quality Management System i.a.w. DIN EN ISO 9001:2008
Certificate No. Q1530722 from TÜV - SÜD Austria
Aircraft component overhaul and repair complying with EASA Part-145
MOT No.: DE.145.0282 Ratings: C7, C9
Military aircraft component and test systems overhaul and repair in accordance with §30
of the German Air Navigation Act and in conjunction with Bundeswehr Joint Service
Regulation ZDv 19/1, Approval-No.: BWB-1280M-T04/08/01
Training for component shops is very specific and the target groups are often very small. Therefore our component shop
related training courses provide basic as well as special knowledge required for people who are involved in the overhaul
of aircraft components.
Our training will enable the participant to understand and interpret component manuals and to work on components
related to
• aircraft mechanic systems and
• aircraft avionic systems using
• aircraft related handbooks.
Practical as well as on-the-job training (OJT) is conducted in cooperation with various departments of
Aircraft Component Services of Lufthansa Technik (LHT), the Lufthansa Technik Group or at the customer’s facilities.
Features
• Theoretical training in well-equipped classrooms
• Practical training with given exercises
• Highly interactive computer-based training
• Field trips at LHT-component shops or at the customer’s location
Advantages
• Transformation of theoretical knowledge into practical work
• Improved usage of manuals, tools & equipment
• Increase of employee's flexibility & efficiency
• Decrease of working time for given tasks
• Cost reduction regarding the failure rate
Basic Training
Component Shops
Quality based on experience
Mechanic Shops
Products
Tubes, Hoses & Cables incl. OJT FG101
Duration: 5 days
Course Objectives: The participant is able to fabricate simple airplane tubing as well as control cables acc. AMM
Target Group: Aircraft engineers
Maintenance station personnel
Workshop personnel
Prerequisites: None
Knowledge about tubing & control cables in airplanes is recommended
Landing Gear Fundamentals FG131
Duration: 5 days
Course Objectives: The participant will be familiarised with fundamentals concerning landing gears to facilitate
the understanding and the accomplishment of work instructions.
Target Group: Skilled workers
Prerequisites: None
Availability subject to special conditions
Rescue and Safety Fundamentals FG141
Duration: 5 days
Course Objectives: The participant will be able to understand and carry out work instructions, assessing
correctly the hazards connected to his work.
Target Group:: Skilled workers
Prerequisites: None
Experience within the scope of rescue & safety is desireable.
Availability subject to special conditions
Air Conditioning & Pressurisation Fundamentals FG151
Duration: 4 days
Course Objectives: The participant will be familiarised with fundamentals concerning air conditioning &
pressurisation systems in aircraft to facilitate the understanding and the accomplishment of
work instructions.
Target Group: Skilled workers
Prerequisites: None
Availability subject to special conditions
Hydraulic System Fundamentals FG161
Duration: 4 days
Course Objectives: The course imparts knowledge concerning the design of aircraft hydraulic systems and the
function of hydraulic components.
Target Group: Skilled workers
Prerequisites: None
Availability subject to special conditions
Avionic Shops
Instruments/Avionic Systems acc. EASA Part 66, Module 11.5 FG001
Duration: 7 days
Course Objectives: The course is designed to provide knowledge requirements for Part-66 Cat. B1 licence holder.
Its design is based on the German credit system.
Target Group: Aircraft engineers
Prerequisites: Several years of experience in aircraft maintenance and type-rating on at least one aircraft type.
Practical Training / Electrical Meters 1 FG031
Duration: 3 days
Course Objectives: The participant is able to perform safe measurement of electric current, voltage & electric
resistance with different kinds of measurement devices
Target Group: Aircraft engineers
Prerequisites: None
Practical Training / Electrical Meters 2 FG032
Duration: 2 days
Course Ojectives: The participant is able to perform safe measurement of insulation & contact resistance
Target Group: Aircraft engineers
Prerequisites: None
Basic Electrical Skills FG041
Duration: 5 days
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料28(77)