曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Provides important hands-on experience required to develop
necessary investigative and interpretative skills while using specialized
equipment to detect, interpret, evaluate and repair damage in the
compressor gaspath. Customer must supply blade-blending equipment
required for this training. Requires Pratt & Whitney source approval.
PW4000 Engine Series Courses
9
Post-Maintenance Test – All Models (5 Days)
ATA Level: IV Class Size: 12
Course Code: 4005 B747/767/PW4000
4105 A300/PW4100
4405 MD11/PW4400
4135 A330/PW4100-100 inch
4035 B777/PW4000-112 inch
Designed for mechanics, technicians and propulsion engineers
responsible for engine testing and analysis. Students will develop
the skills necessary to perform engine test procedures, monitor
performance and evaluate the engine’s condition. Practical
experience will be gained using test logs and data to monitor
performance and troubleshoot engines.
Heavy Maintenance (B1-B2) – All Models
ATA Level: V Class Size: 6 to 8
Course Code: 4007 B747/767/PW4000 (10 Days)
4107 A300/PW4100 (10 Days)
4407 MD11/PW4400 (10 Days)
4137 A330/PW4100-100 inch (10 Days)
4037 B777/PW4000-112 inch (15 Days)
Designed for personnel who are responsible for performing and
supervising limited and major engine assembly and disassembly.
The course provides practical hands-on training on the assembly
and on the disassembly of major build groups, using special
tooling, equipment and appropriate technical manuals.
Maximum Heavy Maintenance (B3) – All Models
(See note for class duration.)
ATA Level: V Class Size: 2 to 4
Course Code: 4006 B747/767/PW4000
4106 A300/PW4100
4406 MD11/PW4400
4136 A330/PW4100-100 inch
4036 B777/PW4000-112 inch
Designed for personnel who are responsible for performing and
supervising limited and major engine assembly and disassembly.
The course provides practical hands-on training on the assembly
and on the disassembly of major build groups, using special
tooling, equipment and appropriate technical manuals.
This course is offered only at the customer’s facility using the
customer’s tooling and engine-build groups.
Note: The number of build groups selected for training determines total course length.
Training days = 3 to 35 days based on an eight-hour day.
Engine Change – Bootstrap Method – All Models (2 Days)
ATA Level: V Class Size: 4 to 6
Course Code: 4111 A300/PW4100
4411 MD11/PW4400
4141 A330/PW4100-100 inch
4041 B777/PW4000-112 inch
Gives engine-change team members the knowledge required to
remove and install an engine using the bootstrap method. Engine
bootstrap tooling installation and removal tasks will be performed.
The course will cover the maintenance manual procedure for
preparing the engine for removal and installation.
System Familiarization – All Models (2 Days)
ATA Level: I Class Size: 15 Course Code: 2031 (B757)
Provides an introduction to engine design features and an
overview of engine systems, performance and ground operations.
Line and Base Maintenance – All Models (8 Days)
ATA Level: III Class Size: 12 Course Code: 2033 (B757)
Designed for maintenance technicians and other personnel
associated with line and base maintenance. This course provides a
detailed description of system operation, component location,
onboard reporting systems and fault isolation procedures to
aircraft maintenance manual level.
Borescope Inspection Procedures – All Models (2 Days)
ATA Level: IV Class Size: 4 Course Code: 2030 (B757)
Designed for technicians responsible for performing borescope
inspection of the engine gaspath condition. The course consists
primarily of practical exercises using borescope equipment, a
training engine, mockups and worksheets to develop critical
investigative and interpretive skills.
Compressor Blade Blending – All Models
ATA Level: IV Class Size: 2 to 3 (3 Days); 4 (4 Days)
Course Code: 2012 (6th through 9th Stage)
Provides important hands-on experience required to develop
necessary investigative and interpretative skills while using
specialized equipment to detect, interpret, evaluate and repair
damage in the compressor gaspath. Customer must supply
blade-blending equipment required for this training. Requires
Pratt & Whitney source approval.
Post-Maintenance Test – All Models (5 Days)
ATA Level: IV Class Size: 12 Course Code: 2005 (B757)
Designed for mechanics, technicians and propulsion engineers
responsible for engine testing and analysis. Students will develop
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料28(152)