(1)
Remove the screws (2), (3), the washers (4) and the escape slide lever cover (1) in the sequence as shown.
(2)
Identify the position of the screws for the installation procedure.
Door Frame Linings - Emergency Exit, zones 251/252.
Figure 405/TASK 25-23-47-991-010- 12 (SHEET 1)
CES
Door Frame Linings - Emergency Exit, zones 251/252.
Figure 405/TASK 25-23-47-991-010- 22 (SHEET 2)
CES Subtask 25-23-47-020-079
B. Removal of the Hook (5)
(Ref. Fig. 405/TASK 25-23-47-991-010)
(1) Remove the screws (7), the washers (6) and the hook (5). Subtask 25-23-47-020-073
C. Removal of the Door Frame Lining 251LX (252LX) (11)
(Ref. Fig. 405/TASK 25-23-47-991-010)
(1)
Remove the screws (21) and the washers (12).
(2)
Pull upward the door frame lining (11) to release the engage brackets from the yo-yo rolls and remove the door frame lining (11).
Subtask 25-23-47-020-074
D. Removal of the Door Frame Lining 251KX (252KX) (14)
(Ref. Fig. 405/TASK 25-23-47-991-010)
(1)
Remove the screws (20) and the washers (21).
(2)
Pull downward the door frame lining (14) to release the engage brackets from the yo-yo-rolls and remove the door frame lining (14).
Subtask 25-23-47-020-084
E. Removal of the Door Frame Lining 251FX (252FX) (18)
(Ref. Fig. 405/TASK 25-23-47-991-010)
NOTE : Make sure that you remove the cove light panel(s) 251GX and/or
____
252GX before you do this step.
(1)
Remove the screws (19), (20), the washers (21) and the door frame lining (18) in the sequence as shown.
(2)
Identify the position of the screws for the installation procedure.
Subtask 25-23-47-020-075
F. Removal of the Door Frame Lining(s) 251HX (252HX) (22) and/or 251DX
(252DX) (23)
(Ref. Fig. 405/TASK 25-23-47-991-010)
(1) Remove the screws (21) and the washers (20), lift up the door frame lining(s) (22) and/or (23) release the attach brackets from the yo-yo rolls and remove the door frame lining(s) (22) and/or (23).
Subtask 25-23-47-020-076
G. Removal of the Door Frame Lining 251JX (252JX) (24)
(Ref. Fig. 405/TASK 25-23-47-991-010)
CAUTION : DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS CAN
_______
CAUSE DAMAGE TO THE RETAINER.
(1)
Carefully push the lugs (26) of the cover (27) with your finger in the direction of the arrows and remove the handgrip cover (27).
(2)
Remove the screws (28), the washers (29) and the handgrip (25).
(3)
Pull up the door frame lining (24), release the attach brackets from the yo-yo rolls and remove the door frame lining (24).
Subtask 25-23-47-020-077
H. Removal of the Door Frame Lining 251EX (252EX) (30)
(Ref. Fig. 405/TASK 25-23-47-991-010)
(1)
If necessary remove the recessed panel (31). NOTE : The burrtape attach the recessed panel (31) to the door frame
____
lining (30).
(2)
Remove the handgrip CAUTION : DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS
_______
CAN CAUSE DAMAGE TO THE RETAINER.
(a) Carefully push the lugs (26) of the handgrip cover (27) with your finger in the direction of the arrows and remove the handgrip cover (27).
(3)
Remove the screws (28), the washers (29) and the handle section LWR (25).
(4)
Pull up the door frame lining (30) and release the attach brackets
from the yo-yo rolls.
(5)
Remove the door frame lining (30).
TASK 25-23-47-400-010
Installation of the Door Frame Linings of the LH/RH AFT Emergency Exit Doors, zones 251/252.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
11-00-00-400-002 Installation of the Decals 24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM EQUIPMENT/FURNISHINGS 設(shè)備2(53)
