(1)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (2)
 Clean the component interface and/or the adjacent area.

 (3)
 Do an inspection of the component interface and/or the adjacent area.

 (4)
 FOR 4DS

 (a) Carefully slide the control unit (9) on the adapter assembly (8). NOTE : Make sure that the locking catch (10) holds the control
____
 unit (9) in position.

 (5)
 FOR 14DS

 (a) Install the control unit (4) with the brackets (5), the washers
 (7) and the screws (6) on the support structure (3).

 (6)
 Remove the blanking caps from the electrical connectors.

 (7)
 Make sure that the electrical connectors are clean and in the correct condition.

 (8)
 Connect the electrical connector (1).

 (9)
 Safety the electrical connector (1) with the spring latches (2).

 Subtask 25-27-34-865-055
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
 -7MC, 1DS, 3DS, 11DS, 13DS Subtask 25-27-34-740-050
 C. Do the BITE test of the heated floor panel system (Ref. TASK 25-27-00-740-001).
 5. Close-up
________ Subtask 25-27-34-410-050
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 FOR 4DS

 (a)
 Install the sidewall panel 132JW (Ref. TASK 25-54-12-400-003).

 (b)
 Set the FWD CARGO COMPT light switch 6LU to OFF.

 (c)
 Close the FWD cargo compartment door (Ref. TASK 52-30-00-860-002).

 (3)
 FOR 14DS

 (a)
 Install the sidewall panel 152FW (Ref. TASK 25-55-12-400-003).

 (b)
 Set the AFT CARGO COMPT light switch 8LU to OFF.

 (c)
 Close the AFT cargo compartment door (Ref. TASK 52-30-00-860-002).

 (4) Remove the access platform(s). Subtask 25-27-34-862-050
 B. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 STOWAGE - REMOVAL/INSTALLATION
______________________________
 TASK 25-27-44-000-002
 Removal of a Stowage FWD LH (Zone 231)
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power
R **ON A/C 001-049, 101-105,
 25-27-44-991-001-A  Fig. 401
 **ON A/C 151-199,
 25-27-44-991-001  Fig. 401A
 **ON A/C 201-210,
 25-27-44-991-001-B Fig. 401B R **ON A/C 001-049, 101-105, 151-199, 201-210,
 3. Job Set-up
__________
 Subtask 25-27-44-861-056

 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 Subtask 25-27-44-010-058
 B. Get Access
 (1) Remove and identify the equipment which is kept in the stowage.
 4. Procedure
_________ R **ON A/C 001-049, 101-105,
 Subtask 25-27-44-020-058-A
 A. Removal of the Stowage 6575MM WARNING : SUPPORT THE UNIT/ASSEMBLY OR IT WILL FALL AND BECOME DAMAGED OR
_______ INJURE PERSONNEL. THE UNIT/ASSEMBLY IS HEAVY.
 (Ref. Fig. 401/TASK 25-27-44-991-001-A)
 (1)
 Remove the screws (3) and the covers (2).

 (2)
 Remove the nuts (4) and the washers (5).

 (3)
 Carefully lift the stowage (1) and remove it.

 (4)
 Record the position of the seat-track fittings (7).

 (5)
 Pull the synthetic fiber-cords (9) and remove the sealant from the seat tracks (8).

 (6)
 Remove the stoppers (6) and the seat-track fittings (7) from the seat tracks (8).

 **ON A/C 151-199,
 Subtask 25-27-44-020-058
 A. Removal of the Stowage 6579MM WARNING : SUPPORT THE UNIT/ASSEMBLY OR IT WILL FALL AND BECOME DAMAGED OR
_______ INJURE PERSONNEL. THE UNIT/ASSEMBLY IS HEAVY.
 (Ref. Fig. 401A/TASK 25-27-44-991-001)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備2(87)