(3)
 Remove the curtain rail (1).

 (a)
 Loosen the screw (21) and remove the end cap (20).

 (b)
 Hold the curtain rail (1) in position.

 (c)
 Remove the screws (16) and the bracket (17) and remove the curtain rail.

 (d)
 Remove the fittings (19) and (15).

 EFF : ALL
25-26-41Page 402

 Forward Cabin Divider Figure 401/TASK 25-26-41-991-001-B 
R  EFF :  001-049, 101-105, 201-210,  25-26-41 Page 403 May 01/05
 CES 

 (4) Remove the curtain rail (2).
 (a)
 Remove the retaining rings (12) and the washers (11).

 (b)
 Remove the curtain rail (2) and the washers (11), (26), (25) and (10).

 NOTE : Identify the position of the washers (11), (26), (25) and
____
 (10).

 (c) Remove the the fitting (18).
 (5) Remove the brackets.
 (a)
 Remove the screws (9) and the brackets (8).

 (b)
 Remove the screws (14) and the brackets (13).

 (c) Remove the screws (22), the washers (23) and the straps (24) . **ON A/C 151-199,
 Subtask 25-26-41-020-050-A
 A. Removal of the Curtain Rails:
 (Ref. Fig. 401A/TASK 25-26-41-991-001-A)

 (1)
 Remove the curtain rail (1).

 (a)
 Remove the screw (9) and the end cap (10).

 (b)
 Hold the curtain rail (1) in position.

 (c)
 Remove the screws (13),(14) and (16),the bracket (15) and the curtain rail (1).

 (d)
 Remove the fittings (11) and (17) from the curtain rail (1).

 (2)
 Remove the attendant indication panel 320RH1 (Ref. TASK 23-73-22-000-001).

 (3)
 Remove the end panels (7) of the overhead stowage compartments.

 (a) Open the doors (3) of the overhead stowage compartments on the left and the right side.

 (b) Remove the screws (5) and the washers (6).
 (c) Pull the end panels (7) to the centerline of the aircraft until
 they are free of the holders (4) and remove the end panels (7).
 (4) Remove the curtain rail (2).
 (a) Remove the retaining ring (22) and the washer (21).
 (b) Hold the curtain rail (2) in position.
 (c) Loosen the screws (25) and remove the curtain rail (2).
 (d) Remove the screws (25) and the fittings (27).
 (5) Remove the brackets. 
R  (a) Remove the screws (18) and the brackets (8). 
R  (b) Remove the screws (19) and the bracket (20). 
R  (c) Remove the screws (23),the washers (24) and the bracket (26). 
R  (d) Remove the screws (30), the washers (29) and the straps (28). 
R  **ON A/C 301-399, 
R  Subtask 25-26-41-020-050-B 
R  A. Removal of the Curtain Rails: 
R  (Ref. Fig. 401B/TASK 25-26-41-991-001-C) 
R  (1) Removal of the Curtain Rail (2): 
R  (a) Remove the attendant indication panel 320RH1 (Ref. TASK 23-73-22-
R  000-001). 
R  (b) Open the door (3) of the overhead stowage compartment. 
R  (c) Remove the screw (6) and the washer (7). 
R  (d) Pull the end panel (5) to the centerline of the aircraft until it 
R  is free of the holders (4) and remove it. 
R  (e) Remove the retaining ring (20) and the washer (19). 

 CES

 Forward Cabin Divider 
R  Figure 401A/TASK 25-26-41-991-001-A12 (SHEET 1) 
R  EFF :  151-199,  25-26-41 Page 406 
Aug 01/03
 CES 

 Forward Cabin Divider 
R  Figure 401A/TASK 25-26-41-991-001-A22 (SHEET 2) 
R  EFF :  151-199,  25-26-41 Page 407 
Aug 01/03
 CES 

R R  Forward Cabin Divider Figure 401B/TASK 25-26-41-991-001-C 
R  EFF :  301-399,  25-26-41 Page 408 Feb 01/05
 CES 

R  (f) Hold the curtain rail (2) in position, loosen the screws (10) and 
R  remove the curtain rail (2). 
R  (g) Remove the screw (10) and the fitting (13). 
R  (h) Remove the screws (21) and the bracket (18). 
R  (2) Removal of the Curtain Rail (1): 
R  (a) Remove the screws (8) and the end caps (9). 
R  (b) Hold the curtain rail (1) in position, remove the screws (10) and 
R  the curtain rail (1). 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備2(67)