曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  (c) Remove the fittings (11) and (12) from inside of the curtain rail 
R  (1). 
R  (d) Remove the screws (17) and the brackets (14), (15) and (16). 
R  (3) Removal of the Straps: 
R  (a) Remove the screws (24), the washers (23) and the straps (22). 

 

 **ON A/C ALL
 TASK 25-26-41-400-001
 Installation of the Forward Curtain Rail

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
11-00-00-400-007 Installation of the ESSO (Scotchcal Labels) 23-73-22-400-001 Installation of the Attendant Indication Panel 320RH 24-42-00-861-001 Energize the Ground Service Network from the External
 Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power
 25-26-41-000-013 Removal of the Curtains
 25-26-41-400-013 Installation of the Curtains
 AMM 11-32-25 P.Block 001 INTERIOR PLACARDS (SEE ALSO 11-42-25)

R **ON A/C 001-049, 101-105, 201-210,
 25-26-41-991-001-B Fig. 401
 **ON A/C 151-199,

 25-26-41-991-001-A Fig. 401A
 **ON A/C 301-399,

 25-26-41-991-001-C Fig. 401B
 EFF : ALL
25-26-41Page 410

 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 25-26-41-860-050

 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the ground service network is energized (Ref. TASK 24-42-00-861-001).

 (2)
 Make sure that the FWD Curtains are removed (Ref. TASK 25-26-41-000-013).

 4. Procedure
_________ R **ON A/C 001-049, 101-105, 201-210,
 (Ref. Fig. 401/TASK 25-26-41-991-001-B)
 **ON A/C 151-199,

 (Ref. Fig. 401A/TASK 25-26-41-991-001-A)
 **ON A/C 301-399,

 (Ref. Fig. 401B/TASK 25-26-41-991-001-C)
 **ON A/C ALL

 Subtask 25-26-41-210-065
 A. Preparation for Installation
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 EFF : ALL
25-26-41Page 411

R **ON A/C 001-049, 101-105, 201-210,
 Subtask 25-26-41-420-075
 B. Installation of the curtain rail:
 (Ref. Fig. 401/TASK 25-26-41-991-001-B)

 (1)
 Install the brackets:

 (a)
 Put the straps (24) and the washers (23) in position and install the screws (22).

 (b)
 Put the brackets (8) in position and install the screws (9).

 (c)
 Put the brackets (13) in position and install the screws (14).

 (d)
 Put the fittings (15), (18) and (19) in position.

 

 (2)
 Install the curtain rail (2).

 (a)
 Install the washers (10), (25), (26) and (11) as identified to the brackets (8).

 (b)
 Install the curtain rail (2) to the brackets (8).

 (c)
 Install the washers (11) and the retaining rings (12).

 

 (3)
 Install the curtain rail (1).

 (a)
 Put the curtain rail (1) and the bracket (17) in position and install the screws (16).

 (b)
 Put the end cap (20) in position and install the screw (21).

 

 (4)
 Install the end panels.

 (a)
 Install the end panels (7) on the holders (4) of the overhead stowage compartment.

 (b)
 Install the washers (6) and the screws (5).

 (c)
 Close the doors (3) of the overhead stowage compartment.

 (d)
 Install the Attendant Indication Panel 320RH1 (Ref. TASK 23-73-22-400-001)

 

 

 **ON A/C 151-199,

 Subtask 25-26-41-420-075-A
 B. Installation of the curtain rails:
 (Ref. Fig. 401A/TASK 25-26-41-991-001-A)

 (1)
 Install the brackets.

 (a)
 Put the straps (28) and the washers (29) in position and install the screws (30).

 (b)
 Put the bracket (20) in position and install the screws (19).

 (c)
 Put the bracket (26) and the washers (24) in position and install the screws (23).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備2(68)