R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 28-13-42Page 416 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (2)
 Remove the CTR Vapor Seal-Membrane

 (a)
 Remove the studs (4), the washers (3) and the spring washers (8) from the attach frame (36) and from the longitudinal fittings (37), (38), (39) and (40).

 (b)
 Remove the attach frame, the longitudinal fittings and the sealing strips (75) from the CTR vapor seal-membrane (35).

 (c)
 Remove the screws (6) and the washers (7) from the lateral fittings (41), (42), (43), (44) and (45).

 (d)
 Remove the lateral fittings and the sealing strips (75) from the CTR vapor seal-membrane (35).

 (e)
 Remove the CTR vapor seal-membrane (35) from the center-tank lower surface.

 (3)
 Remove the RH Vapor Seal-Membrane

 (a)
 Remove the nuts (2) and the washers (3) from the studs (4) around the heat shield (47) and from some positions at the attach frames (48), (49), (53) and (55).

 (b)
 Remove the heat shield (47) from the studs (4).

 (c)
 Remove the studs (4), the washers (3) and the spring washers (8) from the attach frames (48), (49), (50), (51), (52), (53), (54) and (55).

 (d)
 Remove the attach frames and the sealing strips (75) from the RH vapor seal-membrane (46).

 (e)
 Remove the studs (4), the washers (3) and the spring washers (8) from the longitudinal fittings (56), (57), (58), (59), (60), (61), (62), (63), (64), (65) and (66).

 (f)
 Remove the longitudinal fittings and the sealing strips (75) from the RH vapor seal-membrane (46).

 (g)
 Remove the screws (6) and the washers (7) from the lateral fittings (67), (68), (69), (70), (71) and (72).

 (h)
 Remove the lateral fittings and the sealing strips (75) from the RH vapor seal-membrane (46).

R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 28-13-42Page 417 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (i) Remove the RH vapor seal-membrane (46) from the center-tank lower surface.
 **ON A/C ALL
 Subtask 28-13-42-210-053
R B. Examine the Vapor Seal/Attachment Fitting Seals (Ref. Fig. 406/TASK 28-13-42-991-007)
 (1) Examine the seals (3) of the vapor seals (1)/attachment fittings (2) for damage/wear, if they have damage/wear, replace them (Ref. TASK 28-13-42-300-001).
 1EFF : ALL 1 28-13-42Page 418 1 1 May 01/04 1 1 1CES 1

R R  Vapor Seal/Attachment Fitting Seals Figure 406/TASK 28-13-42-991-007
 1EFF : 1 1 1CES  ALL  1 111 28-13-42 Page 419 May 01/02

 TASK 28-13-42-400-001
 Installation of the Vapor Seal
 NOTE : You must take care when you work with the vapor seal. Prevent distortion
____ of the metal attach frames and fittings. Make sure that there are no tears or scratches on the vapor seal-membrane.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-012 USA VV-P-236 PURE MINERALVASELINE OR PETRO- LATUM (Ref. 20-31-00) Material No. 05-043 VARNISH P.T.F.E SPRAY (Ref. 20-31-00) Material No. 09-001 USA MIL-S-8802 TYPE I CLASS A FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
103 Packing-Preformed 21-52-03 27B-100 107 Packing-Preformed 21-51-03 08 -055 107 Packing-Preformed 21-51-03 08 -055A 107 Packing-Preformed 21-51-03 08 -055B 203 Packing-Preformed 21-52-03 27B-100
 1EFF : ALL 1 28-13-42Page 420 1 1 May 01/05 1 1 1CES 1 D. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
21-51-41-000-001  Removal of the Ozone Filter (Converter) 100HM (101HM)
 21-51-41-400-001  Installation of the Ozone Filter 100HM (101HM)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油2(45)