(Ref. Fig. 403/TASK 28-13-42-991-001) R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 403A/TASK 28-13-42-991-001-A)
**ON A/C 001-002,
(Ref. Fig. 404/TASK 28-13-42-991-002) R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 404A/TASK 28-13-42-991-002-A)
**ON A/C 001-002,
(Ref. Fig. 405/TASK 28-13-42-991-003) R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 405A/TASK 28-13-42-991-003-A)
**ON A/C 001-002,
Subtask 28-13-42-420-050
A. Installation of the Vapor Seal
(1)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(2)
Clean the component interface and/or the adjacent area.
1EFF : ALL 1 28-13-42Page 424 1 1 Aug 01/05 1 1 1CES 1
(3)
Do an inspection of the component interface and/or the adjacent area.
(4)
Apply SPECIAL MATERIALS (Material No. 05-043) to the edge of the RH vapor seal-membrane (46) where it joins the CTR vapor seal-membrane (35).
NOTE : Put the vapor seal in position and attach it temporarily to
____ make the installation easier. Do not tighten all the screws, the studs and the nuts until all fittings are installed.
(5) Install the RH Vapor Seal-Membrane
(a)
Install the lateral fittings (67), (68), (69), (70), (71) and
(72)
with the screws (6) and the washers (7) to the RH vapor seal-membrane (46).
NOTE : Make sure that the clearance between the bonded sealing
____
parts are filled with sealing compound.
(b)
If necessary apply SEALANTS (Material No. 09-001) to the
clearance between the sealing parts.
(c)
Use SPECIAL MATERIALS (Material No. 05-043) where the vapor seal touches the sealing compound.
(d)
Install the longitudinal fittings (56), (57), (58), (59), (60), (61), (62), (63), (64), (65) and (66) with the studs (4), the washers (3) and the spring washers (8) to the RH vapor seal-membrane (46).
(e)
Install the attach frames (48), (49), (50), (51), (52), (53),
(54)
and (55) with the studs (4), the washers (3) and the spring washers (8) to the RH vapor seal-membrane (46).
(6) Install the CTR Vapor Seal-Membrane
(a)
Apply SPECIAL MATERIALS (Material No. 05-043) to the edge of the CTR vapor seal-membrane (35) where it joins the LH vapor seal-membrane (1).
(b)
Install the lateral fittings (41), (42), (43), (44) and (45) with the screws (6) and the washers (7) to the CTR vapor seal-membrane (35).
(c)
Install the attach frame (36) and the longitudinal fittings (37), (38), (39) and (40) with the studs (4), the washers (3) and the spring washers (8).
1EFF : 001-002, 1 28-13-42Page 425 1 1 May 01/05R 1 1 1CES 1
(7) Install the LH Vapor Seal-Membrane
(a)
Install the lateral fittings (25), (26), (27), (28), (29) and
(30)
with the screws (6) and the washers (7) to the LH vapor seal-membrane (1).
NOTE : Make sure that the clearance between the bonded sealing
____ parts are filled with sealing compound.
(b)
If necessary apply SEALANTS (Material No. 09-001) to the clearance between the sealing parts.
(c)
Use SPECIAL MATERIALS (Material No. 05-043) where the vapor seal touches the sealing compound.
(d)
Install the longitudinal fittings (31), (32), (33) and (34) to the joint of the CTR and the LH vapor seal with the studs (4), the washers (3) and the spring washers (8).
(e)
Install the longitudinal fittings (16), (17), (18), (19), (20), (21), (22), (23) and (24) with the studs (4), the washers (3) and the spring washers (8).
(f)
Install the attach frames (9), (10), (11), (12), (13), (14) and
(15)
with the studs (4), the washers (3) and the spring washers (8).
NOTE : Make sure that the vapor seal-membranes have no scratches
____ or folds before you start to tighten the vapor seal.
(8) TORQUE all the screws (6) and the studs (4) to 0.30 m.daN (26.54 lbf.in).
R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 28-13-42-420-050-A
A. Installation of the Vapor Seal
(1)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(2)
Clean the component interface and/or the adjacent area.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油2(47)
