-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
-release (out) the X FEED - the X FEED P/BSW ON and OPEN lights P/BSW. go off.
On the ECAM lower DU:
-the X FEED valve indicator shows the valve closed (green cross-line).
**ON A/C ALL
5. Close-up
________
Subtask 28-21-00-860-092
A. Aircraft Configuration
(1)
Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001).
(2)
Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(3)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R **ON A/C 001-049, 052-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 28-21-00-410-057
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access door 192MB.
1EFF : ALL 1 28-21-00Page 570 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 28-21-00Page 571 1 1 May 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
R **ON A/C 051-051,
R Subtask 28-21-00-410-057-A
R B. Close Access
R R (1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) Close the access door 192MB.
R **ON A/C ALL
Subtask 28-21-00-942-085
C. Removal of Equipment
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the safety barriers.
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
TASK 28-21-00-710-003
Operational Check of Center Tank Pump Canister Check Valves
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Refer to the MPD TASK: 282100-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power
28-25-00-650-001 Pressure Defuel
28-25-00-869-001 Fuel Transfer
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page 572 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
3. Job Set-up
__________
Subtask 28-21-00-941-072
A. Safety Precautions
(1) Put the safety barriers in position.
Subtask 28-21-00-860-055
B. Aircraft Maintenance Configuration
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED
_______ BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (ECAM only) (Ref. TASK 31-60-00-860-001), then: - on the ECAM control panel (CP), push (in) the FUEL push icon switch
-make sure that the FUEL page is shown on the ECAM lower Display Unit (DU).
(3)
Refuel (Ref. TASK 12-11-28-650-003), defuel (Ref. TASK 28-25-00-650-001) or transfer fuel (Ref. TASK 28-25-00-869-001) as necessary until :
-
the center tank contains a minimum of 500 kg (1103 lb) and a maximum of 4800 kg (10583 lb)
-
the left wing and the right wing tank inner-cells contain a minimum of 750 kg (1700 lb).
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM FUEL 燃油3
