(3)
 Do the EIS Stop procedure (Ref. TASK 31-60-00-860-002).

 1EFF : ALL 1 32-51-00Page 514 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-51-00Page 515 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL

 (4) On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
 (5) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
 (6) If the front of the aircraft is lifted off the ground, lower the aircraft to the ground (Ref. TASK 07-11-00-586-001).
 (7) If the nosewheels are on grease plates, move the aircraft to remove the grease plates (Ref. TASK 09-10-00-584-002).
 (8) Make sure that the work area is clean and clear of tool(s) and other items. 
R  **ON A/C 401-499, 
R  Subtask 32-51-00-860-053-A 
R  A. Put the aircraft back to its initial configuration. 
R R  (1) Depressurize the Yellow hydraulic system (Ref. TASK 29-10-00-864-002). 
R  (2) Lower the aircraft on its wheels (Ref. TASK 07-12-00-582-001). 
R  (3) Do the EIS Stop procedure (Ref. TASK 31-60-00-860-002). 
R R  (4) On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view. 
R R  (5) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002). 
R R  (6) If the front of the aircraft is lifted off the ground, lower the aircraft to the ground (Ref. TASK 07-11-00-586-001). 
R R  (7) If the nosewheels are on grease plates, move the aircraft to remove the grease plates (Ref. TASK 09-10-00-584-002). 
R R  (8) Make sure that the work area is clean and clear of tool(s) and other items.

 TASK 32-51-00-720-004 Functional Test of the Nose Wheel Steering with the Pedals. WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE ITEMS THEY
_______
 OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
 CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 04-022  USA MIL-PRF-81322 GRADE 2
 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 1EFF : ALL 1 32-51-00Page 516 1 1 Aug 01/05 1 1 1CES 1 B. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-586-001 Lowering of the Aircraft at Forward Jacking Point,
 MLG Wheels on the Ground 07-12-00-582-001 Jacking for Nose Gear Wheel Change 09-10-00-584-002 Towing with the Nose Gear from the Front 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
 External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-10-00-863-001 Pressurize the Green Hydraulic System R 29-10-00-863-002 Pressurize the Yellow Hydraulic System 29-10-00-864-001 Depressurize the Green Hydraulic System
R  29-10-00-864-002 Depressurize the Yellow Hydraulic System 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
 3. Job Set-up
__________
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 Subtask 32-51-00-860-054
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (2)
 Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001).

 (3)
 If the test is to be done with the nosewheels on the ground, do these steps:

 NOTE : You will need two 1.2 m (3.93 ft.) square steel plates.
____
 (a)
 Position a steel plate in front of the nosewheels.

 (b)
 Apply a thick layer of COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022) to the upper surface of the steel plate.

 1EFF : ALL 1 32-51-00Page 517 1 1 Aug 01/05 1 1 1CES 1 NOTE : Do not mix Material No. 04-004 with Material No. 04-022.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架8(80)