THERMOSTAT - FAN AIR VALVE CONTROL (7170HM1,7170HM2) - CLEANING/PAINTING
________________________________________________________________________ TASK 36-11-43-100-001 Remove the Thermostat-Filter of the Fan Air Valve-Control for Cleaning
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 361143-01
 2. Job Set-up Information
______________________
 A. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific  alcaline rust remover
 Material No. 05-027  USA MIL-L-81309 RUST INHIBITOR(FOR CORROSION USE 15-004) (Ref. 20-31-00)
 B. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
filter  36-11-43 01D-050
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
36-11-43-000-003  Removal of the Thermostat-Filter of the Fan Air Valve-Control 36-11-43-400-003 Installation of the Thermostat-Filter of the Fan Air Valve-Control
R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 701 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 3. Job Set-up
__________
R  **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 36-1038 For A/C 001-004, Subtask 36-11-43-010-057
 A. Remove the Filter (Ref. TASK 36-11-43-000-003). R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 4. Procedure
_________
R  **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 36-1038 For A/C 001-004, Subtask 36-11-43-170-050
 A. Cleaning of the Filter
 (1)
 Wash the filter with water mixed with 5% of alcaline rust remover and put it momentarily in a warm cleaning bath between 70 deg.C (158.00 deg.F) and 80 deg.C (176.00 deg.F) mixed by an ultrasonic device.

 (2)
 Flush with running water.

 (3)
 To de-water the part, put it momentarily at ambient temperature in SPECIAL MATERIALS (Material No. 05-027).

 (4)
 Dry with hot air between 100 deg.C (212.00 deg.F) and 110 deg.C

 (230.00 deg.F).

 (5)
 If the filter is not clean, replace the filter (4).

R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 702 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499,

 5. Close-up
________
R  **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 36-1038 For A/C 001-004, Subtask 36-11-43-410-053
 A. Install the Filter (Ref. TASK 36-11-43-400-003).
R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 703 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 INLET - BLEED AIR PRECOOLER EXCHANGER - REMOVAL/INSTALLATION
____________________________________________________________
 TASK 36-11-44-000-001
 Removal of the Bleed-Air Precooler Exchanger Inlet
 WARNING : MAKE SURE THAT THE PNEUMATIC SYSTEM IS DEPRESSURIZED BEFORE YOU START
_______ WORK ON THE PNEUMATIC SYSTEM.
 WARNING : BE CAREFUL WHEN YOU WORK ON THE ENGINE COMPONENTS IMMEDIATELY AFTER
_______ THE ENGINE IS SHUTDOWN. THE ENGINE COMPONENTS CAN STAY HOT FOR UP TO ONE HOUR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific blanking plugs
 No specific circuit breaker(s) safety clip(s)
 No specific warning notice
 No specific access platform 3.4 m (11 ft. 2 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
 External Power 71-13-00-010-040 Opening of the Fan Cowl Doors 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
 Maintenance 78-36-00-010-040 Opening of the Thrust Reverser Doors 36-11-44-991-001 Fig. 401
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PNEUMATIC 氣源 1(96)