F 『 EEFF : ALL E Page 40971-11-00
 E E Nov 01/99 E E ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 (3) Install the preformed hose (35) and the clamps (30) on the ECU and the ECU cooling duct.

 (4) Install anti-ice duct (40) (Ref. TASK 30-21-51-400-042).

 (5) Connect the electrical connector (4001VC-A) (45) for the interphone jack to the receptacle on the fan case. Tighten the connector with your hand.

 5. Close-up
________ Subtask 71-11-00-410-051
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the fan cowl doors (Ref. TASK 71-13-00-410-040):
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (3) Remove the access platform(s).

 (4) Remove the warning notice(s). Subtask 71-11-00-820-051
 B. Do the adjustment of the fan cowl doors (Ref. TASK 71-13-00-800-041).
 F 『 EEFF : ALL E Page 41071-11-00
 E E Nov 01/99 E E ECES E AIR INTAKE COWL - INSPECTION/CHECK

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

__________________________________
 TASK 71-11-00-210-001
 Visual Inspection of the Air Intake Cowl
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific warning notice
 No specific access platform 1 m (3 ft. 3 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP2517  * aerodynamic tape (Ref. 70-30-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors SRM 541000 71-11-00-991-302 Fig. 601 71-11-00-991-303 Fig. 602 71-11-00-991-304 Fig. 603 71-11-00-991-305 Fig. 604
 F 『 EEFF : ALL E Page 60171-11-00
 E E Feb 01/98 E E ECES E 3. Job Set-up

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

__________ Subtask 71-11-00-941-053
 A. Safety Precautions
 (1) On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.

 (3) On the overhead maintenance panel 50VU:

 (a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.

 (b) Put a warning notice to tell persons not to energize the FADEC 1(2).

 Subtask 71-11-00-010-052
 B. Get Access
 (1) Open the fan cowl doors (Ref. TASK 71-13-00-010-040):
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (2) Put the access platform in position.

 F 『 EEFF : ALL E Page 60271-11-00
 E E Feb 01/98 E E ECES E 4. Procedure

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

_________ (Ref. Fig. 601/TASK 71-11-00-991-302, 602/TASK 71-11-00-991-303, 603/TASK 71-11-00-991-304, 604/TASK 71-11-00-991-305) Subtask 71-11-00-210-050
 A. Do a Visual Inspection of the Intake Cowl Outer Barrel
 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
1. Examine edge around
 outer barrel skin 1.5
 in. (38.1 mm) from
 all edges and cutouts
 A. Abrasion 
R 
R 
R 
R 
R 
R 
B. Crack 
C. Delamination 
R  D. Scratch or Gouge 
R 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 動力裝置 POWER PLANT 1(94)