(2)  
B00148 Methyl Ethyl Ketone (MEK) - TT-M-261

 (3)  
G00033 Lint-free cheesecloth

 C.
Procedure

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-34
 ALL  ú ú 01 Page 704 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 157-019
 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
 (1)  Apply solvent, Series 84 (AMM 20-30-84/201) to the area with a clean cheesecloth.
 NOTE: Use a clean piece of the cheesecloth each time you apply
____ solvent, series 84 (AMM 20-30-84/201). Do not let solvent touch areas where it is not necessary to remove paint.
 S 117-009
 (2)  When the area is fully clean, immediately rub with a clean cheesecloth it until it is dry.
 TASK 20-10-34-117-018
 6. Clean Bare, Clad, or Plated Metal with Solvent
______________________________________________
 A. General
 (1)  Use this task to clean plated surfaces and CRES or alclad aluminum that is not painted.
 B. Equipment
 (1)  Nonmetallic brush or cloth applicator
 C. Consumable Materials
 (1)  
G00033 Lint-free cheesecloth

 (2)  
B00192 Solvent - BMS 3-2, type 1

 D. Procedure
 S 117-011
 (1)  
Apply solvent to the bonding surfaces with a brush that is not metal or a cloth applicator.

 (2)
Rub with force to remove all the contamination you can see.

 (3)  
Immediately dry surfaces with lintfree cheesecloth.

 S 117-012
 S 117-013
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-34
 ALL  ú ú 01 Page 705 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 ELECTRICAL BONDING - REMOVAL/INSTALLATION
_________________________________________
 TASK 20-10-37-904-010
 1.  Electrical Bonding - Removal/Installation_________________________________________
 A. General
 (1)  Refer to SWPM 20-20-00 Electrical Bonding and Grounding in the Standard Wiring Practice Manual D6-54446.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-37
 ALL  ú ú 01 Page 401 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 CONTROL CABLE GROMMET - REMOVAL/INSTALLATION
____________________________________________
 1.  General_______
 A.  This procedure contains one task. The task is the replacement of the control cable grommet.
 B.  You can replace the control cable grommets in 3/4, 1, and 1-1/4 inch holes with the control cable removed or installed. If you replace a NAS1368 type plastic grommet with the control cable installed, you have two alternatives. You can divide the new NAS1368 grommet for installation or you can use a BACG20H nylon grommet, which is a divided grommet.
 TASK 20-10-41-964-001
 2.  Control Cable Grommet - Replacement___________________________________
 A.  Equipment
 (1)  
Sharp Knife, Razor Blade, or Suitable Cutting
 Equipment

 (2)  
Grommet Installation Set - A20006-32

 B.  Consumable Materials
 (1)  
A00273 Adhesive, BMS 5-126 Type 2 Class 1 or
 Type 3 Class 1

 (2)  
A00119 Adhesive, BMS 5-55

 (3)  
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 STANDARD PRACTICES(26)