homogeneous color.Equipment

 (1)  
Bottles, Polyethylene - size as necessary, with nozzle

 (2)  
Brush, Fiber - soft bristle

 (3)  
Burnishing Tool - plastic or wood

 (4)  
Gloves, Knitted Cotton - lightweight, white

 (5)
Spray EquipmentConsumable Materials

 (1)  
Solvents

 (a)  
B00192 or B00193 BMS 3-2, Type I or Type II

 (b)  
B00148 Methyl Ethyl Ketone (MEK), TT-M-261

 (c)  
B00083 Aliphatic Naphtha, TT-N-95, Type II

 (2)  
G00117 Tape, Masking - Permacel P112

 (3)  
G00033 Wipers, BMS 15-15, Classes A and B

 (4)  
G00251 Abrasive Paper - 280 grit or finer

 (5)  
Finishes

 (a)  
C00319 BMS 10-79, Type II Primer

 (b)  
C00032 BMS 10-60, Type II Enamel

 (c)  
C00035 EC 942 Black (Corogard)

 (6)  
B00151 Methyl Isobutyl Ketone (MIBK)

 (7)
B00079 Butyl AcetateReferences

 (1)  
AMM 51-21-11/701, Paint Stripping

 (2)  
AMM 51-21-21/701, Prepaint Cleaning and Treatment

 (3)
AMM 51-21-99/701, Decorative Exterior FinishesPrepare Surface for Stencil Markings

 S 954-002

 (1)  
Apply masking tape or use a protective cover on all adjacent surfaces which you will not clean, treat, or paint.

 S 034-003

 (2)  
If it is necessary to remove used markings, do the steps that follow:

 (a)  
Strip the markings (AMM 51-21-11/701)

 (b)  
Prepare the surface (AMM 51-21-21/701)

 (c)  
Apply a layer of material equivalent to the initial material (AMM 51-21-99/701).

 S 114-004
 (3)  Do these steps to clean the surface:
 (a)  Remove all loose dirt and unwanted grease or oil.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-61
 ALL  ú ú 01 Page 402 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 WARNING:_______DO NOT SPRAY SOLVENTS. DO NOT KEEP SOLVENTS IN OPEN CONTAINERS. DO NOT USE FLAMMABLE SOLVENTS IN AIRPLANE. SOLVENTS AND CLEANERS CONTAIN TOXIC INGREDIENTS. WEAR PROTECTIVE GLOVES WHEN YOU USE THEM. DO NOT GET SOLVENT OR CLEANER ON YOUR SKIN OR EYES. MAKE SURE YOU HAVE SUFFICIENT VENTILATION OR USE RESPIRATOR MASKS.
 CAUTION:_______DO NOT USE SOLVENTS OTHER THAN THOSE SPECIFIED. THEY CAN CAUSE DAMAGE TO THE FINISH.
 (b)  Use the applicable solvent as follows:
 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR
_______ ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
 1) For tedlar, teflon, and solvent resistant finishes, use solvent, Series 98 (AMM 20-30-98/201). 2) For acrylic surfaces, use naphtha, TT-N-95, Type II. 3) For all other surfaces and where there is possible hydraulic fluid contamination, use BMS 3-2.
 (c)  Use a polyethylene bottle to apply the solvent to the work surface or to a clean wiper.
 NOTE: Do not put the wiper into the solvent container.
____
 (d)  
Rub the surface firmly with a wiper or soft brush.

 (e)  
Flush the surface with clean solvent.

 (f)  
Let the excess solvent drain off the surface and the dry it with a cloth.

 S 114-005
 (4)  Do these steps to clean the surface again:
 (a)  Apply the solvent to a clean wiper.
 NOTE: Do not put the wiper into the solvent container.
____
 (b)  Rub the surface with the wiper. Immediately rub the surface dry with a clean, dry wiper.
 NOTE:____Do not let the solvent dry by air. Rub it dry. Replace the dirty wiper frequently with a clean one.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 STANDARD PRACTICES(76)