SWAGING TORQUE AND I.D. AFTER SWAGE REQUIREMENTS
FOR 35211 SLEEVE AND 35212 UNIONS

Harrison Portable Swagers for BACS13BX Sleeves
Figure 813 (Sheet 5)

L09950
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-51
 ALL  ú
 ú  03  Page 868
 ú  Jul 12/01 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L12290
A737-300/400/500MAINTENANCE MANUAL
Swage Pressures for Elastomer Swaging Flareless Sleeves
Figure 814 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.ú
 20-10-51
ALL  úú 03 Page 869 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
21-6-9 CRES AS SHOWN IN BMS 7-185SWAGER
TUBE MODEL
SIZE

SWAGE PRESSURENO.
6061-T6 AL PER WW-T-700/6 OR MIL-T-7081 OR AMS 4083 SWAGE PRESSURE
6061-T4AL PER MIL-T-7081 ORAMS 4083
SWAGE PRESSURE
304, 321, AND 347 CRES
SWAGE PRESSURE
WALL

(PSI)

(PSI) |5%

(PSI) |5%

(PSI)

04
05
06
08
(IN.)
BACS13BX
5175 0.016 475

0.020 1000
0.020 1150
0.026 2000
*  SWAGE PRESSURES NECESSARY TO INSTALL BACS13BX FLARELESS SLEEVES ON TUBE MATERIALS WITH THE HARRISON PORTABLE AND STATIONARY SWAGERS
(IN.)
0.020
N/A
0.035
0.035

0.035

BACS13BX 475*

N/A
940 1150*

2000*

304 CRES (MIL-T-8504), 321 AND 347 CRES (MIL-T-8808) 304 1/8 HARD CRES (MIL-T-6845)
MINIMUM SWAGE PRESSURE - IF YOU MUST SWAGE AGAIN, INCREASE IN 5% INCREMENTS.
A 737-300/400/500MAINTENANCE MANUAL

Swage Pressures for Elastomer Swaging Flareless Sleeves
Figure 814 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-51
 ALL  ú ú 03 Page 870 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L12293
A 737-300/400/500MAINTENANCE MANUAL

04  05  06  08  10  12  16  20  24 
P |0.010  0.214  0.230  0.230  0.285  0.330  0.330  0.392  0.355 0.395 1 2  0.350 0.465 1 2 
A max  0.374  0.437  0.493  0.673  0.789  0.964  1.214  1.474  1.723 
G max  0.298  0.364  0.423  0.550  0.686  0.822  1.070  1.323  1.573 
H max  0.260  0.322  0.385  0.511  0.636  0.761  1.011  1.262  1.517 

DIMENSION
NOTE: ALL DIMENSIONS ARE IN INCHES.
DIMENSIONS OF FLARELESS TUBE ENDS AND BACS13BX SLEEVES AFTER ELASTOMERIC SWAGING

ALL EXCEPT SHORT FLARELESS SHORT FLARELESS
BACS13BX Flareless Sleeve Dimensions After Elastomeric Swaging
Figure 815

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-51
 ALL  ú ú 02 Page 871 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09965
A 737-300/400/500MAINTENANCE MANUAL

BACS13BX (TWO GROOVES)

TUBE SIZE 04  DEPTH 2A MINIMUM 0.020  - INCHES MAXIMUM 0.032 
05  0.020  0.032 
06  0.020  0.032 
08  0.020  0.032 
10  0.022  0.034 
12  0.026  0.038 
16  0.028  0.040 
20  0.026  0.042 
24  0.026  0.042 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 STANDARD PRACTICES(65)