C.  Removal - Control Cable Grommet
 S 024-002
 (1)  Cut and remove the grommet.
 D.  Installation - Control Cable Grommet (With the control cable not installed) (Fig. 401)
 S 114-003
 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
 (1)  Clean the bulkhead area that will touch the grommet with solvent, Series 98-1 (AMM 20-30-98 or SOPM 20-30-98).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-41
 ALL  ú ú 02 Page 401 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 354-004
 (2)  
Apply BMS 5-126 adhesive to the area where the grommet will touch the structure.

 S 424-005

 (3)  
Put the grommet in its position.

 S 424-006

 (4)
Flip the grommet with the tool from the Grommet Installation Set.

 NOTE: The grommet can be loose in the bulkhead hole but must stay
____ in the bulkhead hole unless you cut the grommet to remove it.
 E.  Installation - Control Cable Grommet (With the Control Cable Installed) (Fig. 401)
 S 114-007
 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
 (1)  
Clean the bulhead area that will touch the grommet with solvent, Series 98-1 (AMM 20-30-98 or SOPM 20-30-98).

 S 434-008

 (2)  
Do these steps for the NAS1368 grommet (Fig. 401):

 (a)  
Flip the grommet with the tool from the Grommet Installation Set.

 (b)  
Split the NAS1368 grommet with a slant cut.

 (c)  
Apply BMS 5-126 adhesive to the area where the grommet will touch the structure.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-41
 ALL  ú ú 02 Page 402 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
NAS1368 GROMMET

FLIP-TYPE CABLE GROMMET (NAS1368)  GROMMET POSITIONING

NYLON CABLE GROMMET (BACG20H)

Control Cable Grommets Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-41
 ALL  ú ú 01 Page 403 ú Jul 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (d)  
Install the grommet into the bulkhead hole.

 (e)  
Align the slit part of the grommet at the 12 o'clock position.

 S 434-009
 (3)  Do this step for the BACG20H grommet (Fig. 401):
 (a)  
Apply BMS 5-55 adhesive to the area where the grommet will touch the structure.

 (b)  
Install the grommet into the bulkhead hole.

 (c)  
Align the slit part of the grommet at the 12 o'clock position.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-41
 ALL  ú ú 02 Page 404 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 STANDARD PRACTICES(27)