20-10-51
 ALL  ú ú 03 Page 843 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08206
A 737-300/400/500MAINTENANCE MANUAL

REPAIR METHOD - PERMANENT UNIONS, TUBE-TO-TUBE
TABLE B

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 3)

L08210
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-51
 ALL  ú ú 01 Page 844 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
FOR TABLES REF LETTER A AND B  TOOL REQUIRED 
A  Swager No. 5570 Harrison Portable Swagers No. 5175 and 5720 or equivalent stationary 
B  Pressure Presetting Tools ST878D 
C  Hand Presetting Tools ST879A 
D  Harrison Roller Swage Tool Kit 6633K01 
D (1)  Harrison Roller Swaging Machine 6777 
E  ----. . ----Refer to Fig. 825 for individual tool numbers DLT01MAPM1000 (manual, 10,000 psi) is necessary for swaging with No. D12102C06-26A00 for sizes 08,10, and 12 (1/2, 5/8 and 3/4 inch One pump unit, DLT02MAPP1000 (pneumatic, 10,000 psi) or Consult Deutsch for tool kit numbers the tool kits shown. DLT Series with the tool kits shown. One pump unit, Part No. D12025-001, is necessary for swaging No. D12102C11-04 for size 16 (1 inch) No. D12102C03-01A00 for sizes 04 and 06 (1/4 and 3/8 inch) D12000 Series Deutsch Permaswage Kits: 
F  FRK3P02111-001 AMCI: . 
G  None necessary - hand tools only. 
H  Aeroquip Rynglok Kit RTS8-02-006 for sizes 04, 06, 08, 10, 12, 16, 20. 

TOOL REQUIRED FOR REPAIR METHOD
TABLE C

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 4)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-51
 ALL  ú
 ú  01  Page 845
 ú  Nov 12/01 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08220
A 737-300/400/500MAINTENANCE MANUAL
NUMBER PART  ASSOCIATED APPROVED FITTINGS 
5 7FITTING NUTS  6UNIONS 
(BITE-Type) BACS13AP BACS13BX (Elastomer Swage) BACS13BX (Roller Swage)  BACN10YL-Alum AS4660-Alum size 20, use: BACN10CS-Alum or Steel MS21921-Alum or Steel For size 20 and 24 Aluminum flareless fittings, use: tubes used with short . . . . For Aluminum tubes less than________  size 20, use: MS21902-Alum or Steel M21924-Alum or Steel flareless fittings, use: tubes used with short AS4663-Alum . For size 20 and 24 Aluminum . . For Aluminum tubes less than________ 
BACN10CS-Cres, Steel MS21921-Cres, Steel or Ti BACN10YE-Cres BACN10YA-Ti . . . . For Cres tubes, use:____  MS21924-Cres, Steel or Ti MS21902-Cres, Steel or Ti For Cres tubes, use:____ . . 
BACN10YA-Ti BACN10YE-Cres MS21921-Ti, Cres For Ti tubes, use:__ . . . . AS4660-Ti (sizes 20 and 24 only)  __ . . . . MS21902-Cres or Ti MS21924-Cres or Ti For Ti tubes, use: AS4660-Ti (sizes 20 and 24 only) 35212 swaged union 
35211 Sleeve (Roller Swage)  BACN10YA-Ti BACN10YE-Cres __ MS21921-Ti, Cres . . . . For Ti tubes, use: AS4660-Ti (sizes 20 and 24 only)  . . . . __ MS21902-Cres or Ti MS21924-Cres or Ti For Ti tubes, use: 35212 swaged union AS4660-Ti (sizes 20 and 24 only) 
(Roller Swage) 35212 Union  N/A  N/A 
921721 CRYOLIVE Assembly  ________ . 921721T-921721J-921721W- (sizes 04 thru 12 only For Aluminum tubes, use: . . For Cres tubes, use:____ For Ti tubes, use:__  __ . . MS21924-Cres or Ti MS21902-Cres or Ti For Ti tubes, use: 

ASSOCIATED APPROVED FITTINGS
TABLE D

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 5)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-51
 ALL  ú
 ú  03  Page 846
 ú  Jul 12/01 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08222
A 737-300/400/500MAINTENANCE MANUAL
TUBE SIZES 
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊(cè) STANDARD PRACTICES(59)