NOTE: The control cabin temperature can be taken as approximately
____
 the same as the passenger cabin.

 S 715-086
 (3)  If the cabin temperature is less than 83°F (28°C), do this check of the automatic temperature control:
 (a)  
Move the CONT CABIN temperature selector switch, on the P5-17 panel, to a position which is a few degrees more than the cabin temperature.

 (b)  
Move the L PACK switch to AUTO or HIGH, on the P5-10 panel.

 (c)  
Make sure that the indicator needle of the CONT CABIN - AIR MIX VALVE indicator moves toward HOT, on the P5-17 panel.

 S 715-087
 (4)  If the cabin temperature is more than 83°F (28°C), do this check of the automatic temperature control:
 (a)  
If the cabin temperature is more than 85°F (30°C), move the CONT CABIN temperature selector switch to 85°F (30°), on the P5-17 panel.

 (b)  
If the cabin temperature is between 83°F (28°C) and 85°F (30°C), move the CONT CABIN temperature selector switch to the cabin temperature.

 (c)  
Move the L PACK switch to AUTO or HIGH, on the P5-10 panel.

 (d)  
Make sure that the indicator needle of the CONT CABIN - AIR MIX VALVE indicator stays at COLD, on the P5-17 panel.

 (e)  
Move the CONT CABIN temperature selector switch to MANUAL WARM.

 (f)  
Make sure that the indicator needle of the CONT CABIN - AIR MIX VALVE indicator moves toward HOT.

 (g)  
Move the CONT CABIN temperature selector switch to AUTO NORMAL.

 (h)  
Make sure that the indicator needle of the CONT CABIN - AIR MIX VALVE indicator moves toward COLD.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-61-00
 ALL  ú ú 01 Page 516 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 715-088
 (5)  
Use your hand to feel and make sure that air enters the cabin at the cabin inlet.

 S 865-089

 (6)  
Move the AIR TEMP switch to SUPPLY DUCT.

 S 865-090

 (7)  
Hold the CONT CABIN temperature selector switch momentarily to MANUAL WARM while you monitor the temperature indicator, on the P5-17 panel.

 S 215-091

 (8)  
Make sure that the temperature indication increases.

 S 865-092

 (9)
Hold the CONT CABIN temperature selector switch momentarily to MANUAL COOL while you monitor the temperature indicator.

 S 215-093

 (10)
 Make sure that the temperature indication decreases.

 S 865-094

 (11)
 Hold the CONT CABIN temperature selector switch to MANUAL WARM until the temperature indication increases to 77°F (25°C).

 S 865-095

 (12)
 Move the CONT CABIN temperature selector switch to AUTO COOL.

 S 215-096

 (13)
 Let the temperature indication become stable.

 S 215-097

 (14)
 Make sure that the temperature indication is at 39|5°F (4|3°C).

 NOTE: Refer to 36-11-05/101, Engine Bleed Air Distribution System,
____ or 21-51-00/101, Air Cycle System, if the temperature indication does not become stable at 39|5°F (4|3°C).
 S 865-098
 (15) Move the L PACK switch to OFF.
 F. Operational Test - Temperature Control System (Passenger Cabin)
 S 865-187
 (1)  
Move the AIR TEMP switch to PASS CABIN, on the P5-17 panel.

 S 975-100

 (2)  
Monitor the temperature indicator, on the P5-17 panel, and make a record of the cabin temperature.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-61-00
 ALL  ú ú 01 Page 517 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 715-101
 (3)  If the cabin temperature is less than 83°F (28°C), do this check of the automatic temperature control: (a) Move the PASS CABIN temperature selector switch, on the P5-17 panel, to a position which is a few degrees more than the cabin temperature. (b) Move the R PACK switch to AUTO or HIGH, on the P5-10 panel. (c) Make sure that the indicator needle of the PASS CABIN - AIR MIX VALVE indicator moves toward HOT, on the P5-17 panel.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 空調 AIR CONDITIONING 2(133)