FWD
A
Ram Air Inlet Deflector Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-52-21
ALL ú ú 01 Page 403 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
RAM AIR INLET DEFLECTOR SHAFT ASSEMBLY - REMOVAL/INSTALLATION
_____________________________________________________________
1. General_______
A. The ram air inlet deflector shaft assembly is referred to as the deflector shaft assembly.
TASK 21-52-31-004-001
2. Ram Air Inlet Deflector Shaft Assembly Removal______________________________________________
A. General
(1) Before you remove the deflector shaft assembly, you must first remove the deflector found in the ram air inlet.
B. References
(1) AMM 21-52-21/401, Ram Air Inlet Deflector
C. Access
(1)
Location Zones
211 Left Ram Air Duct
213 Right Ram Air Duct
(2)
Access Panels
1305 Left A/C Ram Air Inlet
1302 Right A/C Ram Air Inlet
D. Prepare to Remove the Deflector Shaft Assembly
S 014-002
(1)
Remove the deflector found in the ram air inlet (AMM 21-52-21/401).
S 014-003
(2)
Remove the access panel 1305 or 1302.
E. Remove the Deflector Shaft Assembly
S 024-004
(1) Do these steps to remove the deflector shaft assembly (Fig. 401):
(a)
Disconnect the extension link from the drive arm.
(b)
Do the steps that follow to remove the drive arm: 1) Cut the lockwire on the spring pins.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-52-31
ALL ú ú 01 Page 401 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
2) Push the two spring pins out of the shaft and the drive arm. 3) Remove the drive arm from the shaft.
(c) Remove the lower support.
NOTE: When the lower support moves away from the
____ structure, the shaft will fall with it. This will disconnect the shaft from the upper support.
(d) Put the deflector shaft assembly at an angle and remove it.
TASK 21-52-31-404-013
3. Install the Ram Air Inlet Deflector Shaft Assembly
__________________________________________________
A. Equipment
(1)
F70207-93 Rigging Pin Kit
(2)
Shop Aid (Fig. 401)
B. References
(1) AMM 21-52-21/401, Ram Air Inlet Deflector
C. Access
(1)
Location Zones
211 Left Ram Air Duct
213 Right Ram Air Duct
(2)
Access Panels
1305 Left A/C Ram Air Inlet
1302 Right A/C Ram Air Inlet
D. Prepare to Install the Deflector Shaft Assembly
S 824-005
(1) Make a mark on the drive arm to show the position of the drive arm on the deflector shaft.
NOTE: Make sure you make the mark on the drive arm before you
____ remove it from the deflector shaft.
S 824-006
(2)
Make a mark on the new deflector shaft assembly to make sure the drive arm to deflector shaft position is the same.
S 034-007
(3)
Push out the two spring pins which keep the drive arms on the deflector shaft.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-52-31
ALL ú ú 01 Page 402 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
E. Install the Deflector Shaft Assembly
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 空調 AIR CONDITIONING 2(57)
