21-51-31
 ALL  ú ú 02 Page 404 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 WATER SPRAY INJECTOR - REMOVAL/INSTALLATION
___________________________________________
 TASK 21-51-37-004-001
 1.  Water Spray Injector Removal (Fig. 401)____________________________
 A. Access
 (1)  
Location Zones
 212 Left Air Conditioning Equipment Bay
 214 Right Air Conditioning Equipment Bay

 (2)  
Access Panels
 3303L Air Conditioning Access Panel
 3403R Air Conditioning Access Panel

 B. Prepare to Remove the Water Spray Injector
 S 014-002
 (1)  Open the doors to the air conditioning bay to get access to the water spray injector.
 C. Remove the Water Spray Injector
 S 034-003
 (1)
Disconnect the water line and the air line from the injector.

 S 034-004

 (2)  
Remove the nut and washer which hold the injector to the ram air bulkhead.

 (3)  
Remove the injector.

 S 024-005
 TASK 21-51-37-404-006
 2.  Water Spray Injector Installation (Fig. 401)_________________________________
 A. References
 (1)  36-05-00/201, Pneumatic System
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-37
 ALL  ú ú 02 Page 401 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. Access
 (1)  
Location Zones
 212 Left Air Conditioning Equipment Bay
 214 Right Air Conditioning Equipment Bay

 (2)  
Access Panels
 3303L Air Conditioning Access Panel
 3403R Air Conditioning Access Panel

 C. Install the Water Spray Injector
 S 434-007
 (1)  
Connect the injector to the water inlet line.

 S 214-017

 (2)  
Make sure the injector aligns with the air inlet line and the opening of the ram air bulkhead.

 S 434-008

 (3)  
Connect the injector to the air inlet line.

 S 424-010

 (4)
Put the injector through the opening in the ram air bulkhead.

 S 434-009

 (5)  
Install the washer and the nut which hold the injector to the bulkhead.

 D. Do a Test of the Water Spray Injector
 S 864-011
 (1)  
Supply pneumatic pressure (Ref 36-05-00/201).

 (2)  
Put the PACK switch to HIGH on the P5-10 overhead panel.

 (3)  
Make sure that a spray of air and water comes out of the injector.

 S 864-012
 S 714-013
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-37
 ALL  ú ú 02 Page 402 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 864-014
 (4)  
Put the PACK switch to OFF.

 S 864-015

 (5)  
Remove the pneumatic pressure if it is not necessary (Ref 36-05-00/201).

 E. Put the Airplane Back to Its Usual Condition
 S 414-016
 (1)  Close the doors to the air conditioning bay.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-37
 ALL  ú ú 01 Page 403 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE  A  INLET ACM TURBINE 
SEE  B 
RAM AIR DUCT 

SEE B
FWD  A  WATER SEPARATOR WATER LINE FROM 
WASHER 
NUT 
DUCT WALL RAM AIR  INJECTOR WATER SPRAY  UP ACM TURBINE INLET AIR LINE FROM 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 空調 AIR CONDITIONING 2(28)