(b)  
Go into the opening for access panel No. 4 (AMM 28-10-00/201).

 (c)  
Do this task for all bonding jumpers between rib No. 8 and rib No. 9: Inspection of the Electrical Bonding Jumpers in the Fuel System. 1) Refer to drawing 65-48406 for bonding jumper locations.

 (d)  
If access is not necessary for subsequent tasks, install access panel No. 4 (AMM 28-11-11/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 28-00-00
 ALL  ú ú 01 Page 211 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 282-049
 (5)  For the area in the No. 2 fuel tank between rib No. 9 (rib at WBL 254.00) and rib No. 10 (rib at WBL 279.25), do these steps:
 (a)  
Remove access panel No. 5 (7407) on the right wing
 (AMM 28-11-11/401).

 (b)  
Go into the opening for access panel No. 5 (AMM 28-10-00/201).

 (c)  
Do this task for all bonding jumpers between rib No. 9 and rib No. 10: Inspection of the Electrical Bonding Jumpers in the Fuel System. 1) Refer to drawing 65-48406 for bonding jumper locations.

 (d)  
If access is not necessary for subsequent tasks, install access panel No. 5 (AMM 28-11-11/401).

 S 282-050
 (6)  For the area in the No. 2 fuel tank between rib No. 10 (rib at WBL 279.25) and rib No. 11 (rib at WBL 304.50), do these steps:
 (a)  
Remove access panel No. 6 (7408) on the right wing
 (AMM 28-11-11/401).

 (b)  
Go into the opening for access panel No. 6 (AMM 28-10-00/201).

 (c)  
Do this task for all bonding jumpers between rib No. 10 and rib No. 11: Inspection of the Electrical Bonding Jumpers in the Fuel System. 1) Refer to drawing 65-48406 for bonding jumper locations.

 (d)  
If access is not necessary for subsequent tasks, install access panel No. 6 (AMM 28-11-11/401).

 S 282-051
 (7)  For the area in the No. 2 fuel tank between rib No. 11 (rib at WBL 304.50) and rib No. 12 (rib at WBL 329.75), do these steps:
 (a)  
Remove access panel No. 7 (7409) on the right wing
 (AMM 28-11-11/401).

 (b)  
Go into the opening for access panel No. 7 (AMM 28-10-00/201).

 (c)  
Do this task for all bonding jumpers between rib No. 11 and rib No. 12: Inspection of the Electrical Bonding Jumpers in the Fuel System. 1) Refer to drawing 65-48406 for bonding jumper locations.

 (d)  
If access is not necessary for subsequent tasks, install access panel No. 7 (AMM 28-11-11/401).

 S 282-052
 (8)  For the area in the No. 2 fuel tank between rib No. 12 (rib at WBL 329.75) and rib No. 13 (rib at WBL 355.00), do these steps:
 (a)  
Remove access panel No. 8 (7410) on the right wing
 (AMM 28-11-11/401).

 (b)  
Go into the opening for access panel No. 8 (AMM 28-10-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 28-00-00
 ALL  ú ú 01 Page 212 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (c)  
Do this task for all bonding jumpers between rib No. 12 and rib No. 13: Inspection of the Electrical Bonding Jumpers in the Fuel System. 1) Refer to drawing 65-48406 for bonding jumper locations.

 (d)  
If access is not necessary for subsequent tasks, install access panel No. 8 (AMM 28-11-11/401).

 S 282-053
 (9)  For the area in the No. 2 fuel tank between rib No. 13 (rib at WBL 355.00) and rib No. 14 (rib at WS 453.00), do these steps:
 (a)  
Remove access panel No. 9 (7411) on the right wing
 (AMM 28-11-11/401).

 (b)  
Go into the opening for access panel No. 9 (AMM 28-10-00/201).

 (c)  
Do this task for all bonding jumpers between rib No. 13 and rib No. 14: Inspection of the Electrical Bonding Jumpers in the Fuel System. 1) Refer to drawing 65-48406 for bonding jumper locations.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 1(11)