S 014-049

 (2)  
Remove the access panel for the center fuel tank (AMM 28-11-31/401).

 S 014-032

 (3)  
Get access to the No. 2 bay for the center tank.

 (a)  
Make sure the rubber protection covers are in the correct position around the access panel opening.

 (b)  
Immediately before you go into the tank, remove your shoes and put a pair of tank boot socks on your feet.

 (c)  
Do not let the socks touch the metal particles or the unwanted material from the ladder or from the aerostand.

 S 014-033
 WARNING: USE ONLY CORRECTLY GROUNDED LIGHTS THAT HAVE PROTECTION
_______ FROM SPARKS AND THAT DO NOT CAUSE AN EXPLOSION. YOU CAN CAUSE AN EXPLOSION.
 (4) Go into the fuel tank with lights that have the correct protection.
 (a)  Remove the remaining fuel with an applicable cloth before you do the work in the tank.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-11-41
 ALL  ú ú 01 Page 408 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (b)  Install the rubber protection covers in the beam access opening along the span of the airplane.
 S 034-034
 (5)  Hold the valve in the correct position against the force of the spring, while you remove these parts:
 (a)  
the two nuts

 (b)  
the two washers

 (c)  
the two bolts.

 S 024-035
 (6)  
Remove the sump drain valve.

 S 164-036

 (7)  
Clean the valve seat on the upper housing.

 S 214-037

 (8)  
Examine the seal surface of the valve seat to make sure it is in a good condition.

 TASK 28-11-41-404-038
 7.  Sump Drain Valve Installation (Fig. 401)_____________________________
 A. References
 (1)  AMM 28-11-31/401, Center Tank Access Panel
 B. Access
 (1)  
Location Zone
 221 Center Section Fuel Tank

 (2)  
Access Panels
 3303 A/C Access Panel
 3403 A/C Access Panel

 C. Procedure
 S 434-039
 (1)  
Hold the valve in its correct position on the housing against the force of the spring while you install these parts:

 (a)  
the two bolts

 (b)  
the two washers

 (c)  
the two nuts.

 (2)  
Make sure the valve is in its correct position against the housing.

 (3)  
Make sure the valve operates correctly and the flapper moves freely.

 (4)
Remove all the tools and the equipment from the bay and the tank.

 (5)
Remove the rubber protection covers from the access openings.

 S 214-040
 S 714-041
 S 094-042
 S 094-043
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-11-41
 ALL  ú ú 01 Page 409 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 414-044
 (6)  
Install the access panel (AMM 28-11-31/401). S 024-045

 CAUTION:_______HAVE A CONTAINER PREPARED TO CATCH FUEL LEAKAGE. THE FUEL LEAKAGE CAN CAUSE DAMAGE TO THE EQUIPMENT.

 (7)  
Do the task, "Sump Drain Assembly Removal". S 654-046

 (8)  
Fill the tank with fuel. S 214-047

 (9)  
Make sure there is no leakage from the upper housing. S 424-048

 (10)
 Do the task, "Sump Drain Assembly Installation".

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-11-41
 ALL  ú ú 01 Page 410 ú Nov 15/98
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 1(128)