(2)
The installation of the sump drain valve for the main tank
(3)
A task to replace the O-ring for the primary drain seal on the sump drain valve for the main tank.
B. The sump drain valves for the main tanks are installed in shrink-fit bushings in the skin on the bottom of the wing. The mating threads of the valve and the bushing have a layer of dry film lubricant for protection from galling. If you must remove or install the valve, be careful not to cause damage to the threads.
TASK 28-11-61-002-002
2. Main Tank Fuel Sump Drain Valve Removal
_______________________________________
A. Equipment
(1)
C28002-1 - Spanner wrench (for airplanes with sump drain P/N VD82-2941)
(2)
C28002-9 - Spanner wrench (for airplanes with sump drain P/N 87-5273)
B. References
(1) AMM 28-10-00/201, Fuel Storage
C. Access
(1)
Location Zones
305 Left Fuel Tank
405 Right Fuel Tank
(2)
Access Panels
7202 Fuel Tank Access Door
7402 Fuel Tank Access Door
D. Prepare for the Removal
S 652-001
WARNING: CAREFULLY DO ALL THE SAFETY PROCEDURES TO DEFUEL THE FUEL
_______ TANK AND TO GO INTO IT. INJURY TO PERSONS AND DAMAGE TO EQUIPMENT CAN OCCUR IF YOU DO NOT FOLLOW THE SAFETY PROCEDURES.
(1)
Prepare to go into the applicable fuel tank and go into it (AMM 28-10-00/201).
S 012-003
(2)
Get access to the drain valve through the wing rib openings.
E. Removal Procedure (Fig. 201)
S 032-004
(1) Remove the parts that attach the drain valve.
(a) Remove the lockwire between the valve body and the jamnut.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-61
ALL ú ú 01 Page 201 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b) Remove the jamnut.
S 022-005
(2) Remove the valve body.
(a)
Go out of the tank.
(b)
Remove the valve body from the bushing with a spanner wrench.
(c)
Discard the O-ring.
TASK 28-11-61-402-006
3. Main Tank Fuel Sump Drain Valve Installation (Fig. 201)____________________________________________
A. Equipment
(1)
C28002-1 - Spanner wrench (for airplanes with sump drain P/N VD82-2941)
(2)
C28002-9 - Spanner wrench (for airplanes with sump drain P/N 87-5273)
B. References
(1)
AMM 12-11-00/301, Fuel Servicing
(2)
AMM 28-11-11/401, Wing Fuel Tank Access Panels
C. Access
(1)
Location Zones
305 Left Fuel Tank
405 Right Fuel Tank
(2)
Access Panels
7202 Fuel Tank Access Door
7402 Fuel Tank Access Door
D. Installation Procedure
S 212-007
(1)
Make sure the seal surfaces of the valve body and the bushing are clean and in a good condition.
S 432-008
(2)
Install new O-ring on the valve body.
S 422-009
(3)
Engage the valve body into the bushing.
(a) Make sure you engage the threads of the valve body with the bushing correctly.
S 432-010
(4) Install the parts that attach the drain valve.
(a)
Go into the fuel tank.
(b)
Install the jamnut.
(c)
Tighten the jamnut to 50 pound-inches.
(d)
Install the lockwire between the jamnut and the airplane structure.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 1(131)
