25-58-03
ALL ú ú 01 Page 404 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
CHANNEL
SIDE RAIL (10 LOCATIONS)
CASTER
CARGO TIEDOWN (8 LOCATIONS)
FITTING
(3 LOCATIONS) TENSION STUD
(11 LOCATIONS)
RETRACTABLE
RESTRAINT UNIT
(10 LOCATIONS)
C BEAM
C (2 LOCATIONS)
A
B OUTBD FWD
SCREW, WASHER AND NUT (4 LOCATIONS PER CASTER)
B A
RESTRAINT HOUSING RESTRAINT/CASTER UNIT
SHEAR PLUNGER(7 LOCATIONS) LEVER RETRACTABLELOCKHEAD RESTRAINT LOCKHEAD RESTRAINTRELEASE LATCH SCREW
RESTRAINT BEAM
SHEAR PLUNGER LEVER HOUSING
SHEAR PIN RESTRAINT UNIT TENSION STUD INBD BEAM A-A
CASTERS SIDE RAIL
CARGO TIEDOWN FITTING
SCREW, WASHER AND NUT (4 LOCATIONS PER CASTER)
TENSION STUD
B-B C-C
Restraint/Caster Unit Installation Figure 401
C76774
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-58-03
ALL ú ú 03 Page 405 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
DIRECTIONAL GUIDE PANEL - REMOVAL/INSTALLATION
______________________________________________
1. General
_______
A. This procedure contains these tasks:
(1)
A removal of the directional guide panel.
(2)
An installation of the directional guide panel.
B. The directional guide panel is on the centerline of the main deck cargo, at the body station 520.
TASK 25-58-04-004-001
2. Directional Guide Panel Removal (Fig. 401)
_______________________________
A. Access
(1) Location Zone
813L No. 1 Main Door
B. Procedure
S 034-002
(1) Turn the bolts 90 degrees to the unlocked position at both sides of the panel.
NOTE: The placards at the panel edge show the locked position of
____
the bolts.
S 024-003
(2) Lift the directional guide panel and remove.
TASK 25-58-04-404-004
3. Directional Guide Panel Installation (Fig. 401)
____________________________________
A. Access
(1) Location Zone
831L No. 1 Main Door
B. Procedure
S 214-005
(1)
Make sure the bolts are in the unlocked position.
S 424-006
(2)
Put the directional guide panel in its position on the centerline of the airplane.
(3)
Make sure the shear studs are in the cargo tracks correctly.
S 824-007
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-58-04
ALL ú ú 01 Page 401 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 424-008
(4) Turn the bolts 90 degrees to the locked position at both sides of the panel.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-58-04
ALL ú ú 01 Page 402 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
MOVABLE DIRECTIONAL GUIDE CASTER (6 POSITIONS)
LATCH GUIDE
SHEAR STUD
BOLT
DIRECTIONAL GUIDE PANEL
Direction Guide Panel Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-58-04 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 2(127)
