C.
Prepare for the Removal
S 494-007
WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Install the ground locks in all landing gear (AMM 09-11-00/201).
S 494-008
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2) Do this task: "Installation of the Door Locks on the Wing Landing Gear" (AMM 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-44-08
ALL ú ú 01 Page 401 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
SEE B
A FWD WHEEL WELL RIGHT BODY GEAR INBOARD BULKHEAD
MOTOR ATTACH SCREW (4 LOCATIONS)
OVERIDE MANUAL LEVER POSITION 2 POSITION 1 A MOTOR VALVE
LUG A
VALVE MOTOR CONNECTOR ELECTRICAL
A-A MODULE PARKING BRAKE B FWD
Figure 401 Parking Brake Valve Motor Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-44-08
ALL ú ú 01 Page 402 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 494-009
(3)
Do this task: "Installation of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).
S 494-010
(4)
Install chocks at all wheels.
S 844-050
(5)
Release the parking brake.
S 864-012
(6)
Open this circuit breaker and attach a DO-NOT-CLOSE tag:
(a)
P6 Main Power Distribution Panel
1) 6L18 PARK BRAKE
D.
Procedure
S 024-044
(1)
Do these steps to remove the motor:
(a)
Disconnect the DV23 electrical connector from the motor.
(b)
Put a cap on the plug and the receptacle.
CAUTION: DO NOT MOVE THE MANUAL OVERRIDE LEVER WHEN THE MOTOR HAS
_______ ELECTRICAL POWER. THIS WILL CAUSE DAMAGE TO THE MOTOR.
(c)
Move the manual override lever on the motor to POS 2.
(d)
Remove the four mounting screws from the motor.
(e)
Remove the three washers and the lug.
(f)
Remove the motor from the parking brake module.
(g)
If there is an identification plate for the parking brake module on the motor, remove the identification plate.
(h)
Keep the identification plate with the parking brake module.
TASK 32-44-08-424-023
3. Installation of the Motor for the Parking Brake Valve (Fig. 401)
_____________________________________________________
A. References
(1) AMM 09-11-00/201, Towing
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-44-08
ALL ú ú 01 Page 403 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(2)
AMM 24-22-00/201, Manual Control
(3)
AMM 29-11-00/201, Main Hydrualic Supply System
(4)
IPC 32-44-04 Fig. 1
(5)
SSM 32-44-01
(6)
WDM 32-44-11
B.
Access
(1)
Location Zones
138 Body Landing Gear Well - Right
221 Control Cabin, L.H.
222 Control Cabin, R.H.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 7(126)
