(b)
Slowly and equally lower the aft hoists until the aft shear pins are away from the strut.
(c)
Lower the engine with the hoists, approximately 6 to 8 inches, to obtain clearance between the engine and the strut. 1) Lower the forward and aft ends of the engine at the same
rate.
(d)
Use the lever hoists at the forward end to roll the engine vertical (approximately 7 degrees counterclockwise for engines 1 and 2 and clockwise for engines 3 and 4).
(e)
Lower the engine to the cradle and transportation stand.
(f)
Align the forward and aft adapters (19 and 14, Fig. 409) to the cradle.
(g)
Attach the forward adapters (19) to the cradle with the pins (18).
(h)
Attach the aft adapters (14) to the cradle with the latch (21), washer (22), and nut (23).
(i)
Disconnect the sling support legs (7, 8, Fig. 411B) from the forward and aft handling adapters (19, 14, Fig. 409).
(j)
Remove the protection pads.
(k)
Pull the transportation stand, with the cradle and the engine attached, forward until it is away from the strut.
S 094-132-N00
(7) Remove the propulsion pod overhead sling (Fig. 411B).
(a)
Move the sling away from the engine and airplane and remove the sling from the crane hook.
(b)
Remove the tag lines.
(c)
Remove the dynamometer or load positioner, if installed.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-02
ALL ú ú N04 Page 465 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
TASK 71-00-02-404-051-N00
6. Install the Power Plant With the Bootstrap Equipment
____________________________________________________
A. Special Tools and Equipment
(1)
G71003 Bootstrap Equipment
(2)
A71003-40 Torque Equipment - Engine Mount
(3)
A71006-79 Cradle
(4)
A71030-32 Fan Cowl Hold-Open Equipment
(optional)
(5)
A78001-22 Thrust Reverser Hold-Open Equipment
(6)
110059-501 Transportation Stand, Stang
Hydronics, Inc.
(7)
G71023 Hold-Open Equipment - Fan and Core Cowls
(Optional) - (20 Knots)
B.
Standard Tools and Equipment
(1)
Protection pads
(2)
Torque Wrench - 3/4 square drive
C.
Consumable Materials
(1)
D00010 Antiseize Compound - Bostick Never-Seez
(2)
D00005 Grease - BMS 3-24
D. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 408 | 1 | Bolt (Screw) | 54-51-01 | 43A | 150 | | 411 | 1 | Bolt | 54-51-09 | 01 | 10 | | | 2 | Bolt | | | 5 | | | 3 | Washer | | | 15 | | | 5 | Barrel Nut | 71-21-01 | 01 | 103 | | | 6 | Nut Retainer | | | 105 | | | 7 | Bolt | 54-51-09 | 01 | 20 | | | 8 | Washer | | | 25 | | | 9 | Nut | | | 40 | | | 10 | Retainer | | | 50 |
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-02
ALL ú
ú N04 Page 466
ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | | 11 | Washer | | | 35 | | | 12 | Bolt | | | 30 | | | 13 | Retainer | | | 45 | 2.......….......…...................................…...........….....…........1
E. References
(1)
AMM 54-51-03/601, Spring Beam
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 動力裝置 POWER PLANT 2(8)
