(2)
AMM 36-11-02/401, Intermediate Pressure Check Valve
(3)
AMM 36-11-19/401, Pressure Regulating Valve (PRV)
(4)
AMM 70-23-00/201, Tightening Techniques and Torque Values
(5)
AMM 71-11-04/201, Fan Cowl Panels
(6)
AMM 71-11-06/201, Core Cowl Panels
(7)
AMM 75-24-13/401, Turbine-Vane-and-Blade Cooling Air-Valve Position Switch
(8)
AMM 78-31-00/201, Thrust Reverser System
E.
Access
(1)
Location Zone
412 Engine 1 - HPC 3 or 9:30 o'clock
422 Engine 2 - HPC 3 or 9:30 o'clock
432 Engine 3 - HPC 3 or 9:30 o'clock
442 Engine 4 - HPC 3 or 9:30 o'clock
(2)
Access Panel
415 Left Thrust Reverser Half - Engine 1
416 Right Thrust Reverser Half - Engine 1
425 Left Thrust Reverser Half - Engine 2
426 Right Thrust Reverser Half - Engine 2
435 Left Thrust Reverser Half - Engine 3
436 Right Thrust Reverser Half - Engine 3
445 Left Thrust Reverser Half - Engine 4
446 Right Thrust Reverser Half - Engine 4
F.
Procedure
S 424-048-N00
(1)
Remove all the protection covers.
S 424-049-N00
(2)
If it is necessary to install a new TVBCA valve (5), do the steps that follow:
(a)
Lubricate the threads of the adapter (21) with engine oil.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-24-01
ALL ú ú N02 Page 410 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b)
Install the new gasket (20) on the adapter (21).
(c)
Install the adapter (21) in the port on the TVBCA valve (5).
(d)
Tighten the adapter (21) to 110-120 pound-inches (12.4-13.6 newton-meters).
S 424-050-N00
(3) Install the turbine-vane-and-blade cooling air-valves:
(a) Attach the new gasket (6) to the valve boss on the HPC case with paraffin wax.
CAUTION: WHEN YOU USE A STANDARD TORQUE ADAPTER, YOU MUST ADJUST
_______ THE TORQUE WRENCH READING. IF YOU DO NOT OBEY THIS INSTRUCTION, YOU CAN CAUSE DAMAGE TO THE THREADED PARTS.
(b)
Find the torque wrench reading when you use the standard torque adapter (AMM 70-23-00/201).
(c)
For the left TVBCA valve (5), do the steps that follow: 1) Put the TVBCA valve (5) and the bracket (10 and 19) on the
valve boss. 2) Lubricate the threads of the bolts (16) with engine oil. 3) Use a standard torque adapter to attach the TVBCA valve (5)
with the bolts (16). a) Tighten the bolts (16), from one corner to the opposite corner, to 85-95 pound-inches (9.6-10.7 newton-meters). b) Without loosening, tighten the bolts (16) again until the necessary torque is kept.
4) Attach the support bracket (12) for the wire bundle to the bracket (10) on the TVBCA valve flange with the bolts (11), washers (13), and nuts (14). a) Tighten the nuts (14).
(d) For the right TVBCA valve (5), do the steps that follow: 1) Put the TVBCA valve (5) and the bracket (24) on the valve boss. 2) Lubricate the threads of the bolts (23 and 28) with engine oil.
3) Use a standard torque adapter to attach the TVBCA valve (5) with the bolts (23 and 28). a) Tighten the bolts (23 and 28), from one corner to the
opposite corner, to 85-95 pound-inches (9.6-10.7 newton-meters).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-24-01
ALL ú ú N02 Page 411 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
b) Without loosening, tighten the bolts (23 and 28) again until the necessary torque is kept. 4) Lubricate the threads of the bolts (29, 30, and 40) with engine oil.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 大氣 AIR 1(50)
