曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(2)  Install the Oil Filter. Use a lubricant approved by the Oil Filter manufacturer : S Lubricate the gasket on the Oil Filter. S Install the Oil Filter. S Torque to 23 Nm (17 ft.lb). 
(3)  Lock the Oil Filter to the Oil Filter Housing using locking wire. 
(4)  Install the engine cowlings.  Refer to Section 71-12. 
(5)  Fill the engine with oil to the correct level.  Refer to Section 12-10. 
(6)  Do an engine ground run-up. Monitor the oil temperature. Look specially for oil leaks.  The oil temperature indicator must show the relevant oil temperature. Refer to the DA 40 F Airplane Flight Manual. 
(7)  Stop the engine 

DA 40 Series AMM
DA 40 F

Intentionally left blank

 

　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40飛機維護手冊 DA 40 SERIES AMM 6(89)