曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

by selecting the CREATE PLT option.
If the identifier is not in the data base, the DEFINE WPT page will
be displayed so that pilot defined waypoint (PILOT WPT) can be
entered. A PILOT WPT can be defined by any of three methods:
1. Latitude/Longitude, where the coordinates of the pilot defined
waypoint are entered directly.
2. Radial/Distance, where a reference waypoint (which can be a
waypoint, VOR, NDB or airport) is identified and a
radial/distance offset is specified.
3. Radial/Radial, where two reference waypoints are identified,
and the radial for each is specified. This method is useful, for
example, in identifying the unnamed intersection of two airways.
Once defined this waypoint will be stored in the Pilot data base.
Section V
Operations
2423sv602 5-15
Change 1
Flight Plan and Editing
After initialization the system is ready to accept a flight plan.
Proceed as follows
1. Press the FPL key to access FPL 1/1.
The cursor will appear over an empty field and ready to accept
waypoint number ”2”. Waypoint number “1” will prefill with the airport
from the initialization process. UniLink RTE and COPY CO RTE will
only be present if the system is configured for these options.
2. Using the direct entry process type in the identifier for the
waypoint or press the LIST key and locate the desired waypoint
and press the ENTER key. The NEXT and PREV keys will page
through 10 pages of waypoints the closest waypoints. The
cursor will move to the next waypoint.
3. To insert an airway, insure that the previous waypoint is on the
desired airway.
a) Press the LIST key to access the LIST page and the
AIRWAYS line select key to list the airways. Enter the
reference number of the desired airway.
b) Enter the airway terminator on the airway terminator page
and return to the FPL page.
Continue entering waypoints into the flight plan via the LIST function
or direct entry to the destination airport.
Section V
Operations
5-16 2423sv602
Change 1
Designate Fly-Over Waypoint
An overfly waypoint is a waypoint which will cause the navigation
computer to delay making an automatic leg change until the aircraft
is directly overhead. An overfly waypoint is indicated by an asterisk
(*) following the waypoint identifier on the flight plan display page.
The following procedure may be used to designate a flight plan
waypoint as an overfly waypoint.
1. Press the FPL key to access the FPL page. If the desired
waypoints are not displayed, use the PREV and NEXT keys to
page through the flight plan to find the desired waypoint.
2. Use the line select keys to position the cursor over the waypoint
to be defined as an overfly waypoint.
3. Press the OVFLY line select key. An asterisk will appear after
the waypoint identifier.
4. To remove, the “*” press the same line select key now labeled
CNCL OVFLY.
Add Waypoint To Flight Plan
1. Press the FPL function key to access the first FPL (Flight Plan)
page. If the desired waypoints are not displayed, use the NEXT
and PREV keys to display additional flight plan waypoints.
2. Use the line select keys to position the cursor over the waypoint,
which will follow the new waypoint.
3. Enter the new waypoint using the LIST function or by typing in
the identifier. When the new waypoint is entered, it will be
inserted in the position selected and the waypoint under the
cursor will have advanced to the next position.
Section V
Operations
2423sv602 5-17
Change 1
Delete Waypoint(s) From Flight Plan
1. Press the FPL function key to access the first FPL (Flight Plan)
page. If the desired waypoints are not displayed, use the NEXT
and PREV keys to display additional flight plan waypoints.
2. Use the line select keys to position the cursor over the waypoint
to be deleted.
3. Press DEL line select key twice.
NOTE: If it is desired to delete the remainder of the flight plan,
enter a reference number greater than the reference
number of the last waypoint on the flight plan. Do not
enter 99 or the entire flight plan will be deleted.
Change Waypoint In Flight Plan
1. Press the FPL function key to access the first FPL (Flight Plan)
page. If the desired waypoints are not displayed, use the NEXT
and PREV keys to display additional flight plan waypoints.
2. Use the line select keys to position the cursor over the first
waypoint to be changed.
3. Press DEL line select key twice.
4. Enter the new waypoint using the LIST function or by typing the
identifier. When the new waypoint is entered, it will be inserted
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰(zhàn)者手冊10(65)