(6)
 Install the blanking plug (31) in the rigging hole of the rudder trim actuator (4).

 (7)
 TORQUE the blanking plug (31) to to 0.10 m.daN (8.84 lbf.in).

 (8)
 Safety the blanking plug (31) with MISCELLANEOUS (Material No. 19-010).

 Subtask 27-23-41-865-052
 D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CC1, 5CC2, 14CC1, 14CC2, 15CC
 Subtask 27-23-41-860-052
 E. Preparation for the Test
 (1)
 On the overhead panel 23VU, push the FLT CTL/FAC 1 pushbutton switch and the OFF legend goes off.

 (2)
 On the overhead panel 24VU, push the FLT CTL/FAC 2 pushbutton switch and the OFF legend goes off.

 Subtask 27-23-41-710-050
 F. Test
 (1) Do an operational test of the artificial feel and trim unit (Ref. TASK 27-23-00-710-001).
 (2) Do an operational test of the rudder trim actuation (Ref. TASK 27-22-00-710-002).
 5. Close-up________
 Subtask 27-23-41-860-053
 A. Put the aircraft back to the serviceable condition.
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Apply a layer of SPECIAL MATERIALS (Material No. 05-027) to the adjacent structure.
 (3) Make sure that the drain holes in the adjacent structure are not blocked.
 (4) Remove the warning notice(s). 
R  Subtask 27-23-41-410-050-A 
R  B. Close Access 
R R  (1) Make sure that the work area is clean and clear of tool(s) and other items. 
R  (2) Close the access door 312AR. 
R  (3) Close the access panels 325BR, 325BL (Ref. TASK 55-33-13-410-002). 
R  (4) Remove the access platform(s).

 LIMITATION UNIT - RUDDER TRAVEL (4CC) - REMOVAL/INSTALLATION
____________________________________________________________
 TASK 27-23-51-000-001
 Removal of the Rudder Travel Limitation Unit 4CC
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)
 No specific warning notices
 No specific adjustable access platform 8.0 m (26 ft. 3 in.)
 98D27207545000 3 PIN - RIGGING
 98D27207546000 1 PIN - RIGGING

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action R 29-10-00-863-003 Pressurize the Blue Hydraulic System with a Ground R Power Supply
 29-10-00-864-003 Depressurize the Blue Hydraulic System -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

**ON A/C 001-003, 051-054,
 27-23-51-991-001 Fig. 401 R **ON A/C 004-049, 055-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 27-23-51-991-001-A Fig. 401A
 **ON A/C ALL

 3. Job Set-up
__________
 Subtask 27-23-51-861-050

 A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002). Subtask 27-23-51-865-055
 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18
 Subtask 27-23-51-860-051
 C. Aircraft Maintenance Configuration WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱2(110)