**ON A/C ALL

 TASK 27-24-51-400-001
 Installation of the Rudder Servo Control 1025GM/2025GM/3025GM
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
 CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.

 WARNING : PRESSURIZE ONLY THE HYDRAULIC SYSTEM(S) THAT IS (ARE) NECESSARY FOR
_______ THE TASK. ISOLATE THE OTHER HYDRAULIC SYSTEM(S) BEFORE YOU SUPPLY HYDRAULIC POWER TO THE AIRCRAFT.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific container No specific warning notices No specific access platform 11.0 m (36 ft. 1 in.)
R No specific 4 CAP - BLANKING R No specific 4 GAGE - FEELER No specific Torque Wrench : range 0.00 to 1.20 m.daN
 (0.00 to 9.00 lbf.ft)
 No specific Torque Wrench : range 0.20 to 3.60 m.daN

 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00 to 75.00 lbf.ft) SL90-313-7500 2 TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 SL90-374-7500 2 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454

 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
98D27207516000 1 RIGGING PIN SET
 98D27207545000 1 PIN - RIGGING
 98D27207546000 1 PIN - RIGGING
 98D27207548000 1 PIN - RIGGING

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
No specific  lockwire, corrosion-resistant steel, dia 0.8 mm
 (0.032 in.)
 Material No. 02-003  F NSA 307110 TYPE 4
 HYDRAULIC FLUID (PHOSPHATE ESTER BASE)
 (Ref. 20-31-00)

R Material No. 04-004 USA MIL-PRF-23827 TYPE I

R  SYNTH.ESTER BASED GREASE HIGH PRESSURE
R (Ref. 20-31-00) Material No. 04-018 GENERAL PURPOSE ASSEMBLY PASTE (Ref. 20-31-00) Material No. 05-005 USA MIL-C-16173 GRADE II CORROSION PREVENTIVE (Ref. 20-31-00)
 Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
13 cotter pin 27-24-04 20 -220 13 cotter pin 27-24-04 20A-220 27 cotter pin 27-21-04 08 -050 45 cotter pin 27-24-04 20 -050 72 cotter pin 27-24-04 20 -050 D. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-22-00-400-001  Installation of STA-LOK Nuts and Lockwashers
 20-28-00-912-004  Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-
27-24-00-710-001 Operational Test of the Rudder Hydraulic Actuation 27-24-00-710-002 Operational Test of the Rudder Servocontrols with
 Individual Hydraulic System 27-24-00-820-001 Adjustment of the Rudder Neutral Position 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action 29-10-00-863-001 Pressurize the Green Hydraulic System 29-10-00-863-002 Pressurize the Yellow Hydraulic System 29-10-00-863-003 Pressurize the Blue Hydraulic System with a Ground
 Power Supply 29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-002 Depressurize the Yellow Hydraulic System 29-10-00-864-003 Depressurize the Blue Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
 the Ground Connector 51-75-13-916-002 Repair to a layer of Corrosion Preventive Compound 55-33-13-010-002 Opening/Removal of the Trailing Edge Access-Panels
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱2(137)