Fits and Clearances of the Bearings of the Rudder Hinge Arm Attach Fittings R Figure 603/TASK 27-21-41-991-008
 1EFF : ALL 1 27-21-41Page 606 1 1 Feb 01/02 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 14.262 | 14.275 | | | | | | | OD 3 |(0.5614) |(0.5620) | | | | | | | | | | 0.000 | 0.031 | | | | | | | | (0.0000)| (0.0012)| | | | | B | 14.275 | 14.293 | | | | | | | ID 1 |(0.5620) |(0.5627) | | | | | | -------------------------------------------------------------------------------
R  NOTE : No wear is permitted between the bolt (3) and the bushes (1).____
R
 Subtask 27-21-41-220-054
R C. Measurement of the Fits and Clearances of the Rudder Hinge Bearing No. 6 R (Ref. Fig. 601/TASK 27-21-41-991-007)
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | D | 19.024 | 19.037 | | | | | | | OD 4 |(0.7489) |(0.7494) | | | | | | | | | | 0.001 | 0.026 | | | | | | | | (0.0000*| (0.0010*| | | | | D | 19.038 | 19.050 | | | | | | | ID 5 |(0.7495) |(0.7500) | | | | | | ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED **********
 NOTE : No wear is permitted between the bolt (4) and the bearing (5).
____

R  Subtask 27-21-41-220-052 
R  D. Measurement of the Fits and Clearances of the Actuator Attach Fittings 
R  (Ref. Fig. 602/TASK 27-21-41-991-009) 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | C | 22.984 | 23.000 | | | 22.984 | | | 
R  | OD 1 |(0.9048) |(0.9055) | | |(0.9048) | | | 
R  | | | | 0.000 | 0.037 | | | 0.037 | 
R  | | | | (0.0000)| (0.0014)| | |(0.0014)| 
R  | C | 23.000 | 23.021 | | | | 23.021 | | 
R  | ID 2 |(0.9055) |(0.9063) | | | |(0.9063) | | 
R  -------------------------------------------------------------------------------
R  NOTE : No wear is permitted between the bush (1) and the bush (2).____ 
R  Subtask 27-21-41-220-053 
R  E. Measurement of the Fits and Clearances of the Actuator Attach Fittings 
R  (Ref. Fig. 602/TASK 27-21-41-991-009) 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | C | 19.024 | 19.037 | | | 19.024 | | | 
R  | OD 3 |(0.7489) |(0.7494) | | |(0.7489) | | | 
R  | | | | 0.000 | 0.034 | | | 0.034 | 
R  | | | | (0.0000)| (0.0013)| | |(0.0013)| 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱2(15)