Subtask 27-21-41-220-055
R R F. Measurement of the Fits and Clearances of the Fork Assy (Ref. Fig. 602/TASK 27-21-41-991-009)
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 7.986 | 7.995 | | | 7.980 | | | | OD 8 |(0.3144) |(0.3147) | | |(0.3141) | | | | | | | 0.005 | 0.029 | | | 0.040 | | | | | (0.0001)| (0.0011)| | |(0.0015)| | E | 8.000 | 8.015 | | | | 8.020 | | | ID 9 |(0.3149) |(0.3155) | | | |(0.3157) | | -------------------------------------------------------------------------------
Subtask 27-21-41-220-056
R R G. Measurement of the Fits and Clearances of the Fork Assy (Ref. Fig. 602/TASK 27-21-41-991-009)
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 6.325 | 6.337 | | | 6.320 | | | | OD 7 |(0.2490) |(0.2494) | | |(0.2488) | | | | | | | 0.013 | 0.061 | | | 0.070 | | | | | (0.0005)| (0.0024)| | |(0.0027)| | E | 6.350 | 6.386 | | | | 6.390 | | | ID 8 |(0.2500) |(0.2514) | | | |(0.2515) | | -------------------------------------------------------------------------------
Subtask 27-21-41-220-057
R R H. Measurement of the Fits and Clearances of the Fork Assy (Ref. Fig. 602/TASK 27-21-41-991-009)
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 6.325 | 6.337 | | | 6.320 | | | | OD 7 |(0.2490) |(0.2494) | | |(0.2488) | | | | | | | 0.013 | 0.061 | | | 0.070 | | | | | (0.0005)| (0.0024)| | |(0.0027)| | E | 6.350 | 6.386 | | | | 6.390 | | | ID 6 |(0.2500) |(0.2514) | | | |(0.2515) | | -------------------------------------------------------------------------------
Subtask 27-21-41-220-062
J. Measurement of the inner Dimensions of the Bearings and Bushes of the
Rudder Hinge Arm Attach Fittings R (Ref. Fig. 603/TASK 27-21-41-991-008)
(1) Make sure that the inner dimension of the bearings (15), (16) and
(18) is between 14.2748 mm (0.5620 in.) and 14.2875 mm (0.5625 in.).
NOTE : No wear is permitted. If necessary, replace the rudder hinge
____ arm attach fitting(s) (Ref. TASK 55-36-41-000-001) and (Ref. TASK 55-36-41-400-001).
(2) Make sure that the inner dimension of the bushes (17) is between
19.037 mm (0.7494 in.) and 19.058 mm (0.7503 in.).
R NOTE : No wear is permitted. If necessary, replace the bushes (17).____
(3) Make sure that there is no play between the bushes (17) and the bushes in the hinge arm.
NOTE : No play is permitted. If necessary, replace the rudder hinge
____ arm attach fitting (Ref. TASK 55-36-41-000-001) and (Ref. TASK 55-36-41-400-001).
R Subtask 27-21-41-220-063
R K. Measurement of the Dimensions of the Attachment Bolts and Bushes
R (Ref. Fig. 601/TASK 27-21-41-991-007)
R (1) Measure the axial play between each of the bushes (1) and their
R related bolts (3), but not the bolt (3) at the rudder fitting.
R (2) Make sure that the axial play is a maximum of 0.092 mm (0.0036 in.).
R (3) Make sure that the bolts (3) have a minimum dimension of 14.20 mm
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱2(16)
