20-32-21 Page 22

 TABLE 1-Y

 -------------------------------------------------------------------------------R | Special Cable Identification Coding | |-----------------------------------------------------------------------------| R | WIRE | TYPE | INSULATOR | SPECIFICATION | STANDARD | R | TYPE | | | | P/N | R | CODE | | | | | |------|---------------------|-------------------|-----------------|----------| | YA | 600V-150.C (302.F) | KAPTON-FEP | AIR 4524 |NSA935290 | | | ALU | GLASS-NOMEX | | | | YB | CHROMEL.22 | PTFE-YELLOW | AIR 4524 |NSA935291 | | YC | ALUMEL.22 | PTFE-PINK | AIR 4524 |NSA935292 | | YD | 600V-MULTI | 6 DE-KAPTON-PTFE | AIR 4524 |NSA935293 | | YE | 600V-MULTI | 5 DE-KAPTON-PTFE | AIR 4524 |NSA935294 | | YF | 600V-MULTI | 6 DK-KAPTON-PTFE | | E0286 | | YG | CHROMEL-ALUMEL | PTFE-ASBESTOS | MIL-W-5846 |NSA935296 | | YJ | EXTENSIBLE CORD | | AIR 4524 |NSA935297 | | YK | 600V-VIBRO | KAPTON-PTFE | AIR 4524 |NSA935298/| | | | | |306 | | YL | CHROMEL.20 |ASBESTOS-WHITE PTFE| MIL-W-5846 |NSA935299 | | YM | ALUMEL.20 |ASBESTOS-GREEN PTFE| MIL-W-5846 |NSA935300 | | YN | 600V-MULTI | 1 XE + 4 DE | AIR 4524 |NSA935301 | | | | KAPTON-PTFE | | | | YP | 600V-MULTI | 1 XE + 10 DE | AIR 4524 |NSA935302 | | | | KAPTON-PTFE | | | | YQ | EXTENSIBLE CORD | AK PVC SHEATH | |NSA935303 | | | 105.C (221.F) | (FOUR WIRES) | | | | YR | 600V-200.C (392.F) | FEP-KAPTON-BRAID | |NSA935304 | | YS | EXTENSIBLE CORD | AKB-PVC SHEATH | |NSA935305 | | | 105.C (221.F) | (FIVE WIRES) | | | | YT | CHROMEL-ALUMEL | 1 YB + 1 YC | AIR 4524 |NSA935307 | | YU | 600V-150.C (302.F) | KAPTON (TAPE) | AIR 4524 |NSA935308 | | | ALU | NOMEX GLASS | | | | YV | 600V - NICKEL-ALU | KAPTON-GLASS NOMEX| | E0438 | | YW | 600V - MULTI | 4 XU + 1 UKA - FEP| |NSA935309 | | YX | EXTENSIBLE CORD | PVC SHEATH | | E0288 | | | 105.C (221.F) | | | | | YY | See NOTE | -| -| -| | YZ | 600V-200.C (392.F) | FEP-BRAID-KAPTON | | E0289 | -------------------------------------------------------------------------------
____
NOTE : YY is the AWM/AWL code of a wire that is a vendor sub-assembly of an equipment and whose type could be given by the CMM of the equipment.

20-32-21 Page 23

 ______
5. Gauges The table that follows gives the list of wire gauges and the related sections.
 ----------------------------------------------------------------------| | EN | | | AWG | WIRE | REAL SECTION | | GAUGE | GAUGE |--------------------------------------------| | | CODE | IN mm2 | IN IN2 | |-----------|-----------|----------------------|---------------------| | 26 | 001 | 0.15 | 0.2 x 10-3 | | 24 | 002 | 0.25 | 0.3 x 10-3 | | 22 | 004 | 0.40 | 0.5 x 10-3 | | 20 | 006 | 0.60 | 0.9 x 10-3 | | 18 | 010 | 1.00 | 1.5 x 10-3 | | 16 | 012 | 1.20 | 2 x 10-3 | | 14 | 020 | 2.00 | 3 x 10-3 | | 12 | 030 | 3.00 | 4 x 10-3 | | 10 | 050 | 5.00 | 7 x 10-3 | | 8 | 090 | 9.00 | 10 x 10-3 | | 6 | 140 | 14.00 | 20 x 10-3 | | 4 | 220 | 22.00 | 30 x 10-3 | | 2 | 340 | 34.00 | 50 x 10-3 | | 1 | 420 | 42.00 | 60 x 10-3 | | 0 | 530 | 53.00 | 80 x 10-3 | | 00 | 680 | 68.00 | 0.1 | | 000 | 850 | 85.00 | 0.13 | | 0000 | 107 | 107.00 | 0.167 | ----------------------------------------------------------------------
____
NOTE : On the electrical drawings, the large gauges have a special
 codification.

 ---------------------------------| DRAWING GAUGE | AWG GAUGE | |-----------------|-------------| | 100 | 0 | | 200 | 00 | | 300 | 000 | | 400 | 0000 | ---------------------------------

20-32-21 Page 24
 Apr 01/05
R  ___________________________6. Manufacturer Identification

 A. Identification by Printing of External Sheaths
 This identification has a series of figures printed horizontally.
 If the wire external diameter is less then 1.27 mm (0.0500 in.), vertical
 printing is permitted.

 (1) United States (US) wire types :
 Printing (as per SPEC 451242/78) with a pitch of 300 mm (11.8110 in.)
 plus or minus 50 mm (1.9685 in.) pitch along the whole length of the
 wire. It must be of the type :
 AA-BB-C-22
 Example : AKA - FF - L - 20
 The code consists of 4 groups of letters or figures. The groups are
 separated by a dash or a space.
 Group 1 : Two or three letters identify the wire type code (Ref.
 tables 1-A to 1-Y).

 e.g.
 AKA
 Group 2 : Two letters identify the manufacturer and the country (Ref.
 table 2). e.g. FF (FILOTEX/FRANCE).
 Group 3 : One or two letters indicate the year of manufacture (Ref.
 table 3).

 e.g.
 L (1973)
 Group 4 : Wire gauge.

 e.g.
 20

 Example : AKA - FF - L - 20
 |  |  |  |------- Wire Gauge
 Wire Type Code  |  |  |
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 2(33)