C.
 E0470

 (1) P/N Identification
 E0470  A 01 R | | | | | | | ------ Provisioning code : R = SIX system | | | no code = TMS90 system | | ---------- Size code | ------------- Color code : A = White | P = Pink ------------------ Standard P/N

20-42-33 Page 3

 (2)
 Characteristics

 (a) Temperature
 -Minimum operating temperature is -40 deg.C (-40.00 deg.F).
 -Maximum operating temperature is 125 deg.C (257.00 deg.F).

 (3)
 Marking

 (a) For E0470 XXX, use TMS90 system:
 -
In non pressurized areas, you must do 1 print and 2 permatisings.

 -
In skydrol areas, you must do 3 prints and 2 permatisings.

 (4)
 For E0470 XXXR, use SIX system (with LEXMARK 2390 printer):

 -After printing, you must do 1 permatising.
 -Make sure that the printing is resistant and that you can read it.

 (5)
 Installation Refer to paragraph: Marking procedure.

 D. E0683 ____
NOTE : This label is used only in non skydrol areas.
 (1) P/N Identification
 E0683  ML  1  Y
 |  |  |  |
 |  |  |  ------------- Color code : W = White
 |  |  |  Y = Yellow
 |  |  ---------------- Thickness code
 |  -------------------- Type code

 ------------------------- Standard P/N
 (2)
 Characteristics

 (a) Temperature
 -Minimum operating temperature is -55 deg.C (-67.00 deg.F).
 -Maximum operating temperature is 135 deg.C (275.00 deg.F).

 (3)
 Marking For marking, use typewriter.

 (4)
 Installation

 -Wind the label around the harness and shrink at 130 deg.C (266.00 deg.F).

20-42-33 Page 4

 E. NSA931025
 (1) P/N Identification
 NSA931025 - 01  A
 |  |  |
 |  |  ---------------- Size code

 | -------------------- Material code ------------------------------ Standard P/N
 (2)
 Characteristics

 (a) Temperature
 -Minimum operating temperature is -55 deg.C (-67.00 deg.F).
 -Maximum operating temperature is 120 deg.C (248.00 deg.F).

 (3)
 Marking Refer to paragraph: Marking procedure.

 (a)
 For NSA931025-01 and -02, use DYNAMARK system.

 (b)
 For NSA931025-03, -04 and -05, use FOTOFOIL system.